Wassup people.
New to the forum - Although I've spent many hours reading here. I've got a few questions so I thought where better than here to ask them.
Ok - First of all a little background.
I've been vaping for the past 5-6 weeks - And I'm loving it - But its the same old thing with everything I do - I want the best available.
You're probably thinking (based on my subjet), then why are you using the iTaste VV? Well, at the moment, money is a little tight (just got married) so I picked up the iTaste VV for £20 - Its a VV/VW device, so I thought it's a pretty good base to start with.
My current setup -
iTaste VV v3
Aspire BDC clearomizer
Decadent Bubblegum Juice (my favourite atm)
Standard BDC coils - 2.1 ohms
I run the iTaste at around 8.5w currently
I've just purchased myself a Kanger Protank 2 from eBay (I know, I know, but it was an authorized dealer, apparently, and the scratch code checks out good with Kangertech.com)
I've been watching a few videos recently about rebuilding the coils - Ive got myself some 28g kanthal resistance wire and some organic cotton balls (thanks to Holland & Barrett). I'm planning on making my first coil this evening.
Now, the questions.
My iTaste runs at a max of 11w... What sort of ohm should I be looking for?
How many wraps should I made the coil? I've seen a few videos that say 6 and then RIP Trippers says 12 wraps...
I appreciate that my battery life isn't going to be great, but I work in an office and always have a charger on deck.
Any other tips and advise would be great - I'm looking to achieve more flavour from my juice than I'm currently getting - Oh and maybe some extra clouds! ;-)
Thanks for listen and I appreciate your time.
Cheers,
Ryan, Cardiff, UK!
New to the forum - Although I've spent many hours reading here. I've got a few questions so I thought where better than here to ask them.
Ok - First of all a little background.
I've been vaping for the past 5-6 weeks - And I'm loving it - But its the same old thing with everything I do - I want the best available.
You're probably thinking (based on my subjet), then why are you using the iTaste VV? Well, at the moment, money is a little tight (just got married) so I picked up the iTaste VV for £20 - Its a VV/VW device, so I thought it's a pretty good base to start with.
My current setup -
iTaste VV v3
Aspire BDC clearomizer
Decadent Bubblegum Juice (my favourite atm)
Standard BDC coils - 2.1 ohms
I run the iTaste at around 8.5w currently
I've just purchased myself a Kanger Protank 2 from eBay (I know, I know, but it was an authorized dealer, apparently, and the scratch code checks out good with Kangertech.com)
I've been watching a few videos recently about rebuilding the coils - Ive got myself some 28g kanthal resistance wire and some organic cotton balls (thanks to Holland & Barrett). I'm planning on making my first coil this evening.
Now, the questions.
My iTaste runs at a max of 11w... What sort of ohm should I be looking for?
How many wraps should I made the coil? I've seen a few videos that say 6 and then RIP Trippers says 12 wraps...
I appreciate that my battery life isn't going to be great, but I work in an office and always have a charger on deck.
Any other tips and advise would be great - I'm looking to achieve more flavour from my juice than I'm currently getting - Oh and maybe some extra clouds! ;-)
Thanks for listen and I appreciate your time.
Cheers,
Ryan, Cardiff, UK!
