Little boxes, little boxes!

[Chegs]

Raguri if you can source an enclosure that takes 130mm long lipo cells, stacking 3 of these 2200 mah lipo's in parallel would give you your 6400mah pack, and as each cell is 40C rated, you'd end up with 120C. Seedy had some 110A rated mosfets on his site last time I was there.

 

[Raguri]

Raguri if you can source an enclosure that takes 130mm long lipo cells, stacking 3 of these 2200 mah lipo's in parallel would give you your 6400mah pack, and as each cell is 40C rated, you'd end up with 120C. Seedy had some 110A rated mosfets on his site last time I was there.

If I was to go Lipo I'd be using this battery:
Turnigy nano-tech Ultimate 6400mah 1S2P 90C Hardcase Lipo Pack

 

[Chegs]

If I was to go Lipo I'd be using this battery:
Turnigy nano-tech Ultimate 6400mah 1S2P 90C Hardcase Lipo Pack

These are awesome though Turnigy 2200mAh 1S 40C Lipoly (Single Cell)

Build a pack from these,and you won't ever want to use 18650/26650's again.

 

[Raguri]

These are awesome though Turnigy 2200mAh 1S 40C Lipoly (Single Cell)

Build a pack from these,and you won't ever want to use 18650/26650's again.

I probably will in the end, but want to use a premade battery for my first one. Less that could go wrong if I do it that way!

 

[Hammy]

If I was to go Lipo I'd be using this battery:
Turnigy nano-tech Ultimate 6400mah 1S2P 90C Hardcase Lipo Pack

Strip the hard case off that lipo and it will fit in a 1590g and leave you a bit of room for the fets, seen a few sx350 modders do this.

 

[robertgoldring]

Dimensions: 93x47x18.3mm

That's the dimensions for the battery I'm.looking at... too small annoyingly.

This big enough Raguri, lol

NEW FIRST AID KIT WHITE LID HOME MEDICAL SUPPLIES TRAVEL STORAGE METAL BOX TIN:Amazon.co.uk:Kitchen & Home

 

[RicModMaker]

These suckers are still slightly tacky. Granted, I did rub them down and gave them a gloss clear coat but how blooming long does it take for this to dry? I need to build mods!

 

[fasteddie600]

These suckers are still slightly tacky. Granted, I did rub them down and gave them a gloss clear coat but how blooming long does it take for this to dry? I need to build mods!

Patience is a virtue seedy!!

I hate painting, my orange box took over a week to dry properly! It's a PITA to get right, I think I am sticking to polished metal or wood!

 

[RicModMaker]

Patience is a virtue seedy!!

I hate painting, my orange box took over a week to dry properly! It's a PITA to get right, I think I am sticking to polished metal or wood!

They are quite dry now. They've had over 2 days since the last coat. Now I'm about to ruin them with sandpaper and polish ;-)

 

[fasteddie600]

They are quite dry now. They've had over 2 days since the last coat. Now I'm about to ruin them with sandpaper and polish ;-)

I got some micomesh polishing cloths like these Micro-Mesh Finishing Cloths & Rolls which are handy for getting a good finish.