Nautilus help needed.

[bob salter]

So I got my nautilus and promptly broke the coil when I was cleaning it. I watched the PBuspardo video on the oddesseuss. I copied that and rebuilt the coil 1.8 ohms great but as soon as I filled it all the liquid in the tank dumped out on me. OK. Shut down the juice adjuster and tried again. Still leaked. I suspect it has to do with the two o rings which were fitted on the nauti over the juice adapter but not in evidence on the real thing. I KNOW these are great tanks. What am I doing wrong?

Thanks
Bob

 

[Whistler]

Check the I ring on the centre pin of the coil assembly. Make sure it is near the end of the pin otherwise it won't seal in the base

 

[stumpey]

does this help ?



Steve

 

[Zombix]

Did you get you nautilus sorted Bob? I ask as I'm having similar problems. It's not leaking out but all I get is a wet drag, even with it only cracked open a bit. I can feel it bubbling, I blow through it to get rid of the excess, and it's OK for one drag, then a bubble pipe again. I've stripped it down and I know there's something I'm missing but can't seem to find what. Grrrrrr

Cheers
Z

 

[Vern]

butting in, but if the top o'ring doesnt seal properly you will get this...I used vaseline.

and also on the o'ring. But much much less vaseline on the o'ring,.,,just a smear. And I used the black oring for that part...
re: orings, watch this I made
http://www.youtube.com/watch?v=9oNUResjczQ