Need Some Help With Coil

[Nathan]

Rite, after doing much trawling and posting about my dripping/leaking Kanger T3S i've come down this route and so far i love it and wouldn't go back to anything else, i love it.

I'm using a Kayfun Lite clone with a Nemesis clone. Battery is Efest 35A 2500mAh 18650

My problem is every build i make its coming out between 1.3-1.5ohms which isn't took bad, a little high for my liking and would ideally like to get lower but here's my problem. To get as 'low' as 1.3-1.5 i've only been able to do 3 wraps of 0.2 kanthal around a 1.5mm drill bit and cotton wool to wick.

Don't get me wrong, it works and i do like it, what i don't like is the fact that i only have 3 wraps of kanthal.

I've read so much about what gauge kanthal to use and its still not very clear, it appears its all swings and roundabouts.

I'd like to get more wraps and get as close to 1ohm as possible. What kanthal do i need please.

Thanks, sorry for such a noob question.

 

[Raguri]

Rite, after doing much trawling and posting about my dripping/leaking Kanger T3S i've come down this route and so far i love it and wouldn't go back to anything else, i love it.

I'm using a Kayfun Lite Clone with a Nemesis clone.

My problem is every build i make its coming out between 1.3-1.5ohms which isn't took bad, a little high for my liking and would ideally like to get lower but here's my problem. To get as 'low' as 1.3-1.5 i've only been able to do 3 wraps of 0.2 kanthal around a 1.5mm drill bit and cotton wool to wick.

Don't get me wrong, it works and i do like it, what i don't like is the fact that i only have 3 wraps of kanthal.

I've read so much about what gauge kanthal to use and its still not very clear, it appears its all swings and roundabouts.

I'd like to get more wraps and get as close to 1ohm as possible. What kanthal do i need please.

Thanks, sorry for such a noob question.

Get some 0.4 or 0.32 , simple
And some 30 amp batteries.

 

[sparkyjuice]

Rite, after doing much trawling and posting about my dripping/leaking Kanger T3S i've come down this route and so far i love it and wouldn't go back to anything else, i love it.

I'm using a Kayfun Lite Clone with a Nemesis clone.

My problem is every build i make its coming out between 1.3-1.5ohms which isn't took bad, a little high for my liking and would ideally like to get lower but here's my problem. To get as 'low' as 1.3-1.5 i've only been able to do 3 wraps of 0.2 kanthal around a 1.5mm drill bit and cotton wool to wick.

Don't get me wrong, it works and i do like it, what i don't like is the fact that i only have 3 wraps of kanthal.

I've read so much about what gauge kanthal to use and its still not very clear, it appears its all swings and roundabouts.

I'd like to get more wraps and get as close to 1ohm as possible. What kanthal do i need please.

Thanks, sorry for such a noob question.

I currently use ribbon kanthal from stealthvape 6/5 turns at 3mm diameter should see you at 1.4 ohms or thereabouts

 

[Nathan]

Get some 0.4 or 0.32 , simple
And some 30 amp batteries.

Im using a 35A battery. How many wraps would i need do you think. Stealth Vapes has it all there and in stock so going to order some now.

 

[Nathan]

I currently use ribbon kanthal from stealthvape 6/5 turns at 3mm diameter should see you at 1.4 ohms or thereabouts

What size do you suggest, theres a lot to choose from.

 

[Raguri]

Im using a 35A battery. How many wraps would i need do you think. Stealth Vapes has it all there and in stock so going to order some now.

Start with 4, work up if needed.

 

[sparkyjuice]

What size do you suggest, theres a lot to choose from.

you're on a KFL soooo not too low or burnage will result....
I use 1mm x 0,1mm ribbon big wick coverage at 1.4 ohm and nice crisp vape
also recommend 0.5mm voodoowol for wick, you can dry burn this stuff and 0.5mm means you can select the number of strands
to suit the coil size......simples !

 

[u8myufo]

you're on a KFL soooo not too low or burnage will result....
I use 1mm x 0,1mm ribbon big wick coverage at 1.4 ohm and nice crisp vape
also recommend 0.5mm voodoowol for wick, you can dry burn this stuff and 0.5mm means you can select the number of strands
to suit the coil size......simples !

What do you class as too low M8? I have a 0.6ohm micro in my Hcigar with cotton wick and Calipitter chow and it`s fucking lush

 

[sparkyjuice]

What do you class as too low M8? I have a 0.6ohm micro in my Hcigar with cotton wick and Calipitter chow and it`s fucking lush

you ain't a noob are you ?

plus Raguri is here and he'll have the poor sod at 0.12 ohms

 

[Huggett]

Im using .3 kanthal around a atty screwdriver 9 winds is bringing me 1.5-1.6 but thats because im dual coiling

4-5 wraps would get you 0.7ish


Sent From Within A Plume Of Vapour...