rebuild rewick n coil

[crackpot]

is it posable to rebuild this clearomizer i know you can just change the head but i would like to rewick n recoil it as it as shot it sorry about the bad pic but camma on phone not that good as the resitance as changed it still fires but dose not vape very well

 

[AndyC1971]

It wont vape very well with a 3.9 ohm resistance, unless you are using a VV mod.

You can rewick these, and 4 wraps of 0.2 kanthal wire would give you approx 1.8 ohms

 

[yoda1970]

Hiya crackpot, yes it's totally possible to rewick and recoil these clearomisers, i've done it 2 or 3 times myself now by following DocVape's extremely good walkthrough on this very forum. If you go to the How To section you'll find it there. Just follow DocVape's instructions and you won't go far wrong. Hope that helps. Happy Vaping!

 

[DocVape]

Hiya @crackpot, yes it's totally possible to rewick and recoil these clearomisers, i've done it 2 or 3 times myself now by following @DocVape's extremely good walkthrough on this very forum. If you go to the How To section you'll find it there. Just follow @DocVape's instructions and you won't go far wrong. Hope that helps. Happy Vaping!

i don't know... I leave the forum for a while come back and find my walk through being revived from obscurity! Thanks yoda1970 - glad it has been of use to people
cheers,
DocVape

 

[crackpot]

ok just had a look it seems easy to do
ordered some stuff just got to wait for posty to come him putting together a kit to carry out and about with me orderd vsome spear heads as well so if out hi can just pop a new one on
as well as some spear clearomizers as well as hi dont have a vape at moment him going to have to refill a carto for a nicolite as hi need a fix so hi dont fall of the wagon
thank you for your help

 

[yoda1970]

crackpot, you're very welcome my friend. You'll find as i have that the planet is a very friendly and helpful place. Just pop in anytime, pull up a chair, and everybody will be more than happy to help you out i'm sure. Happy vaping!

 

[jangeisler]

If you have problems getting low enough ohms for standard baffs, you can try with 0,20 kanthal :-)