UD IGO-F from SaferCigs

[KulrMeStoopid]

This is a personal review of a product I either bought or received free of charge. The opinions expressed here represent my own and not those of this website, planetofthevapes.co.uk

Technical bits first! This lil atomizer consists of more then 2 bits so let me break it down for you!

Top Cap which has a nice drip tip "built in"
Atomizer piece (where you coil your wick... this has two holes for silica wick on either side of the posts
Bottom..."juice cup" The wicks feed through the two holes into this "juice cup" where any excess juice from dripping should gather and theoretically it will keep your wick wet longer
View attachment 7996
The atty is a standard 510 connection, but there is another piece! This one, is for your EGO threads. What you do is screw the piece onto your EGO thread, then the rest of the atty into the 510 bit. The atty and the plinth line up great and look the part.
View attachment 7992
with the plinth on the Ego Battery
View attachment 7993
Moved onto the #20 You can see the plinth is still on the ego. This would come in handy for mods that have both the ego/510 fitting, but leave a little bit of a gap, like on the sig Zmax
View attachment 7994
See the gap?
View attachment 7995

Now the gap is gone. WORDS OF CAUTION. DO NOT screw this down too tight as you might run the risk of not getting it back out. There really isn't a lot of play here!

In this pic you can see the inside of the atty. (i wont show you mine as I mucked it up hardcore and my wick n coil look a hot mess!) but it works at 1.9ohms!!


I'm not done reviewing this as I also am comparing it to the other 2 rebuildable atties I have, The IGO L and the Cyclone....So far this one has the best flavour, but it is the hardest of the 3 for me to set up.

Keep watching this space!!!

 

[Merino-Teflon]

I tried setting this up yesterday, and totally buggered up the coil so everything tasted like burnt burnyjuice. But, today, round two.

 

[KulrMeStoopid]

I wrapped the coil first then fed it through the holes... i didnt cut one side short enough though so theres a lil bump in the wick going to the coil, but the flavour I am getting is unreal. Manabush tastes totally different on this set up and it tastes en better!

 

[Lord Grim]

I'm no admin or moderator and mines coming tomorrow

 

[jrob3rts]

Many of us didn't get one. I feel ya pain but I am loving my new Ebaron dripper. Oooh that hits the spot.
I'll see how the igo f compares when I get one.

 

[daleson]

when are safercigs gonna be selling these

 

[KulrMeStoopid]

when are safercigs gonna be selling these

I suppose after we report back or he sees our reviews on here!

After working with it again today, I strongly suggest coiling your wick first...feeding it through both holes, trimming enough so that the wicks will sit in the juice cup, then attaching the coil to the posts... the way I did it before was a hot mess

 

[Merino-Teflon]

I purchased mine from a different vendor, the only perk I get is stalking the fb profiles of the female members.

 

[ZT]

Nice one Meg .. thanks for the review!

Looks like more money for me to spend!

 

[KulrMeStoopid]

Nice one Meg .. thanks for the review!

Looks like more money for me to spend!

Im still debating the built in DT being a part of the cap... but the DT itself is well rounded and smooth so it feels nice on the lips... its also a nice distance from the coil so the vape is warm, but not too warm and not too cold... a 1.9ohms I think it's perfect. I have always been particular about my DT's anyways but I have my favourites.

I also am not a fan of shiny anymore because of fingerprints, so I think I will brush this up with the dremel so that it matches my lil Sig 20 and my Sig Zmax