What mod are we using today.

[Netvaper]

 

[conanthewarrior]

Even at cut off the 21700's CDR is good, I dont know a few details yet like evdilos cut off and its efficiency. But basic numbers for dual regulated 100w/3.2v/0.9= 34.7amps at cut off.
From mooches testing the batterys are 35A CDR with 50A max.
I'd like to get some more P50B's 35A/60A and P30B batterys cant justify another mycellsupply order yet though.

Yeah I was calculating with 6.2V as the cutoff so 3.1V per cell and at 200W with 90% efficiency as you was, due to the slightly lower cutoff of 3.1V per cell I got 35.84A. I only chose 6.2V as that is a pretty popular cut off point for dual battery mods.
What batteries are they you are using again? Well within the 50A max and just really hitting the 35A CDR, but that would only be at cutoff voltage. Due to sag the mod likely won't fire at this point anyway and you will just get a low battery message/error so you are on the safe side of things for sure.

 

[conanthewarrior]

View attachment 362035

What on earth is that mod? I NEED one, it's like an even smaller Pico! Is it regulated or mech, and also what tank are you using?

 

[Netvaper]

What on earth is that mod? I NEED one, it's like an even smaller Pico! Is it regulated or mech, and also what tank are you using?

It's regulated, a Stratum Balance clone (non-dna one) with a Picatinny (clone) on top.

I did a review of both a while back.

 

[MTB Vaper]

Yeah I was calculating with 6.2V as the cutoff so 3.1V per cell and at 200W with 90% efficiency as you was, due to the slightly lower cutoff of 3.1V per cell I got 35.84A. I only chose 6.2V as that is a pretty popular cut off point for dual battery mods.
What batteries are they you are using again? Well within the 50A max and just really hitting the 35A CDR, but that would only be at cutoff voltage. Due to sag the mod likely won't fire at this point anyway and you will just get a low battery message/error so you are on the safe side of things for sure.

Using Molicel P45B in the Evdilo which automatically lowers the wattage when getting close to cut off. now the prices are dropping for the P50B at mycellsupply I'd get them instead. Also want a couple of eve 40PL 70A for a mech setup to try 0.07 builds.

 

[conanthewarrior]

Using Molicel P45B in the Evdilo which automatically lowers the wattage when getting close to cut off. now the prices are dropping for the P50B at mycellsupply I'd get them instead. Also want a couple of eve 40PL 70A for a mech setup to try 0.07 builds.

Nice, they beat my only P42A I own in their current rating. I only have the 1 21700 for one mech mod that fits that size.
If I get a regulated 21700 mod which I likely will with my collection lol, I will probably go for the P50B's, thanks for letting me know about mycellsupply as well.
I would be scared building that low, as I would worry the device I am using would not be great at detecting something that low, so it could potentially be even lower.
I now trust my DNA200's more than the seperate Ohm reader I have for my RDA's and RTA's.

 

[MTB Vaper]

Nice, they beat my only P42A I own in their current rating. I only have the 1 21700 for one mech mod that fits that size.
If I get a regulated 21700 mod which I likely will with my collection lol, I will probably go for the P50B's, thanks for letting me know about mycellsupply as well.
I would be scared building that low, as I would worry the device I am using would not be great at detecting something that low, so it could potentially be even lower.
I now trust my DNA200's more than the seperate Ohm reader I have for my RDA's and RTA's.

Got two vaperesso Gen 220w in super player mode it fires down to 0.03 really handy saves glowing one coil at a time. Most times the Dovpo is good enough that goes down to 0.05 dont even know what the mods called lol.

 

[conanthewarrior]

Got two vaperesso Gen 220w in super player mode it fires down to 0.03 really handy saves glowing one coil at a time. Most times the Dovpo is good enough that goes down to 0.05 dont even know what the mods called lol.

No I meant for a mech mod, I would be worried that the device I am using to measure the resistance could be off that low, and for example a build I thought was 0.07 was actually something like 0.04 and potentially blow my head off on a mech lol.

It's cool that the vaporesso Gen 220W can fire down to 0.03, what kind of build would that be though? I am guessing some kind of Ni200 build for TC?
I believe my DNA200's can read as low as you want to go, but obviously can't provide the full power range if you go below or above a certain resistance.
Edit: I just double checked and 0.08 or 0.035 is the lowest you can go and still get the full 200W on a DNA200, there was conflicting information, but you can build lower just not fire at full power.

 

[MTB Vaper]

No I meant for a mech mod, I would be worried that the device I am using to measure the resistance could be off that low, and for example a build I thought was 0.07 was actually something like 0.04 and potentially blow my head off on a mech lol.

It's cool that the vaporesso Gen 220W can fire down to 0.03, what kind of build would that be though? I am guessing some kind of Ni200 build for TC?
I believe my DNA200's can read as low as you want to go, but obviously can't provide the full power range if you go below or above a certain resistance.

Firing that low is just to glow them, often they can be lower resistance before glowing which raises the resistance. For low builds I only use N80 or N90 as once glowed the resistance pretty much stays the same.

 

[conanthewarrior]

Firing that low is just to glow them, often they can be lower resistance before glowing which raises the resistance. For low builds I only use N80 or N90 as once glowed the resistance pretty much stays the same.

Ahh wait a minute, I never knew glowing them raised the resistance! Obviously I knew resistance increased with certain wire types as that is how TC works, but not for a non TC wire.

I built my Wotofo lush the other day with something that should have been around 0.32 Ohms, when I first attached it to the mod it read as 0.24, after I fired the coils it raised to 0.32 and stayed there.
I was worried something was going on so kept it away from my mech, but knowing glowing the coils raises the resistance on a standard build makes me think it would likely be fine.