Where am i going wrong?!

[Brett AX2]

You lot are a bad influence

What mAh & 'A' batteries would be best suited to the Z80? it's all alien to me,i wouldn't want to be using the wrong power of battery & possibly causing problems....

 

[MrDJ]

as your going to be using low wattage any of the batteries will do.
samsung 25R are 2500mah
samsung 30Q are 3000mah
molicel P26A are 2600mah
molicel P28A are 2800mah
molicel M35A are 3500mah is a new one on me so i know nothing about this new battery.

as i previously mentioned i use 30Q and P26A/ 28A both at around the 50watts mark but sometimes upto 65watt and no issues what so ever so for the Z80 there will be no issue of overpushing them as i guess you are more a mouth to lung user so much lower wattage.

the higher the number the longer they will last between charging.

anyone shed some light on what max wattage they can all handle.

If you are thinking about the Z80 have a gander through these links
https://www.innokin.com/coolfire-z80
https://www.ecigarettedirect.co.uk/innokin-coolfire-z80#product-care

• 0.8ohm Z Coil: 15 - 18W best with 50vg/50pg
  
• 0.3ohm Z Coil: 30 - 40W best with 70vg

 

[rew]

The 3500 MAH ones should be fine for most MTL set ups. Should be good for at least 20 watts.

 

[Brett AX2]

Noted,thanks guys,i'll nip back on here tomorrow night & catch up with y'all,thanks,much appreciated!

 

[hack400]

To work out the max wattage a battery can handle, a good rule of thumb is 3*Amp rating.

So a 10A battery, such as the Molicel M35 is good for 30W in a single battery mod and 60W in a dual battery.

The Molicel P26/28A’s are rated at 25A and would be ok for 75W in single and 150W in dual battery.

The Samsung are rated at 20A. 60/120W

 

[Deleted member 54254]

Never gone wrong with Sony VTC5a's, sure you can go lower amps wise, but then you're stuck at MTL all the time.

 

[MHL]

To work out the max wattage a battery can handle, a good rule of thumb is 3*Amp rating.

So a 10A battery, such as the Molicel M35 is good for 30W in a single battery mod and 60W in a dual battery.

The Molicel P26/28A’s are rated at 25A and would be ok for 75W in single and 150W in dual battery.

The Samsung are rated at 20A. 60/120W

That's really handy, I hadn't realised that, thanks man

 

[Hangsen E-liquid]

so those are 50vg/50pg so should work fine but as i mentioned the hangsen was 30vg/70pg so quite a bit thinner.

if they keep you off the smokes then thats the main objective.
wish i could get on with the cheaper juices. dearest bottle i ever bought was from america but cost me ruddy £60 to get it here Never again).
average for me is £8-12 for 50ml now.

We do have 50VG products; they're just under a different brand. You might want to try the newly launched Bar Fuel!

 

[Brett AX2]

Hello again folks,hope you're all doing well,i need to wake up this very old thread!.

I've eventually taken the leap & bought myself an Innokin Coolfire Z80 Zenith 2 vape kit but i'm struggling,i'm literally clueless about suitable e-liquids to use in this device,i've tried it with my usual 18mg liquid,the stuff i've used for years in my Aspire BVC's but it's far from pleasurable,messing around with the wattage settings & airflow makes little or no odds,it's obviously just not compatible so i guess i'm going to have to venture into the minefield of flavoured liquids & mixes & i just ain't got a clue!,i've surfed the net & tied my head in knots so i'm hoping some of you good folks can put me right,all this VG & PG ratios etc...where do you start?!

I never thought i'd get into flavoured liquids,i've only ever used tobacco flavour..but...recently i got given an Al Fakher Crown Bar {Mixed Berry) & i have to admit i actually enjoyed it although it was DTL & i much prefer MTL,the amount of 'smog' was impressive & so was the taste.

So,i want to stick to MTL with the Zenith 2,i purchased 2 boxes of 0.8ohm 15-18W Z-Coils along with it for MTL (was that the right choice??!),are flavoured shortfills along with Nic Sats what i need?.
What type of Shortfill liquids & Nic Salts do i need (VG & PG)?.
Is 20mg Nic strength the strongest available?.
I would like a decent amount of 'smog/vape' & throat hit so what liquid & mix ratio would i need to achieve this?

I have an account with Vape UK so any links to suitable liquids from their site would be of great benefit,even just to give me an idea.

I hope that lot makes sense?!

Any information & advice will be hugely appreciated,help me get started on this adventure please!

Many thanks!

I tried to attach a pic of the liquid i've been using for years in my CE5's & then Aspire BVC's but the file is too large for the server?,i think i posted it way back on this thread ages ago....

 

[Brett AX2]

Hello again folks,hope you're all doing well,i need to wake up this very old thread!.

I've eventually taken the leap & bought myself an Innokin Coolfire Z80 Zenith 2 vape kit but i'm struggling,i'm literally clueless about suitable e-liquids to use in this device,i've tried it with my usual 18mg liquid,the stuff i've used for years in my Aspire BVC's but it's far from pleasurable,messing around with the wattage settings & airflow makes little or no odds,it's obviously just not compatible so i guess i'm going to have to venture into the minefield of flavoured liquids & mixes & i just ain't got a clue!,i've surfed the net & tied my head in knots so i'm hoping some of you good folks can put me right,all this VG & PG ratios etc...where do you start?!

I never thought i'd get into flavoured liquids,i've only ever used tobacco flavour..but...recently i got given an Al Fakher Crown Bar {Mixed Berry) & i have to admit i actually enjoyed it although it was DTL & i much prefer MTL,the amount of 'smog' was impressive & so was the taste.

So,i want to stick to MTL with the Zenith 2,i purchased 2 boxes of 0.8ohm 15-18W Z-Coils along with it for MTL (was that the right choice??!),are flavoured shortfills along with Nic Sats what i need?.
What type of Shortfill liquids & Nic Salts do i need (VG & PG)?.
Is 20mg Nic strength the strongest available?.
I would like a decent amount of 'smog/vape' & throat hit so what liquid & mix ratio would i need to achieve this?

I have an account with Vape UK so any links to suitable liquids from their site would be of great benefit,even just to give me an idea.

I hope that lot makes sense?!

Any information & advice will be hugely appreciated,help me get started on this adventure please!

Many thanks!

I tried to attach a pic of the liquid i've been using for years in my CE5's & then Aspire BVC's but the file is too large for the server?,i think i posted it way back on this thread ages ago....