Should be in about a week with any luck. Production times are unpredictable as we have to wait for lathe time then they go in another queue to be nickel plated
Take a trip to a model shop & buy some of their brass tubing (for fuel lines) and use pieces of this over each leg of the Mosfet to give the brake pipe plenty to hold and a length of silicon tube to slide over the brake pipe,then a trip to a motor factors & buy a length of copper brake pipe.Use the brake pipe instead of wires.I'm going to try this this evening,and see if I can obtain a zero VD(presently only 0.1 volts down to 0.3 ohms but jumps to 0.3-0.4 volts at 0.2 ohms)or a 0.1 drop at even lower resistances would do me.