Can anyone recommend me a UK Website for premade coils that come in the little tubs?

[conanthewarrior]

Hello everyone, when I get payed on the weekend I am going to order a steampipes Cabeo RTA clone from China, as the authentic is sold out and also far too expensive, even the clone is $24.99.

Each review I have watched they use a decent sized fused clapton, alien, or similar coil.

I want to get some premade coils that don't break the bank that I can use with the new RTA, and also all of the other ones that I own.

I tend to vape lower wattage, but anything that works well under 50W with a single coil will make me happy.

So if anyone can suggest a website or give me a link to some coils I would be very much appreciated for the help.

Thanks everyone, Conan.

 

[Infinium]

Cabeo RTA

The biggest difference from the original is that Steampipes has released several add-ons over time to improve the performance of the Cabeo. However, it remains an RDL atomizer; quite restricted even with the large PEEK airflow insert and the "open" drip tip. The presence of PEEK in the deck significantly limits the coil you can use, because even though PEEK can withstand several hundred degrees, it's still PEEK from a clone.

Just a heads-up, as I own the Cabeo myself and don’t get much use out of it, except occasionally, since from an engineering standpoint, it's truly one of the best-designed atomizers ever.

At that price, you could get any Hellvape or THC that can actually handle larger coils. Anyway, check out NK or Coilology coils—both are safe bets. They have plenty of options depending on what you need. Coilology also offers spools of complex wire, which save you even more money and allow you to build your coil exactly how you want.

 

[conanthewarrior]

The biggest difference from the original is that Steampipes has released several add-ons over time to improve the performance of the Cabeo. However, it remains an RDL atomizer; quite restricted even with the large PEEK airflow insert and the "open" drip tip. The presence of PEEK in the deck significantly limits the coil you can use, because even though PEEK can withstand several hundred degrees, it's still PEEK from a clone.

Just a heads-up, as I own the Cabeo myself and don’t get much use out of it, except occasionally, since from an engineering standpoint, it's truly one of the best-designed atomizers ever.

At that price, you could get any Hellvape or THC that can actually handle larger coils. Anyway, check out NK or Coilology coils—both are safe bets. They have plenty of options depending on what you need. Coilology also offers spools of complex wire, which save you even more money and allow you to build your coil exactly how you want.

I see, thank you for letting me know.
If it is quite restrictive it might not be the right RTA for me then.

Can you recommend me a Hellvape or THC tank that I can buy? I am looking for something that takes single coils.

Yes I have came across the Coilology spools of wire, the SS316L MTL Staple wire seems about the best bet for me. I won't be using it MTL, DTL just at lower power settings.

 

[Infinium]

that I can buy?

I'm fairly new to the RDL rebuildable world, despite having been building MTL setups for six years.

The two RDL/Cloud atomizers from Hellvape that I've tried are the Dead Rabbit 3 RTA and the RDA 3 (dripper). I should be trying another one soon, and I hope it will be on the same level. The DR 3 RTA really impressed me with the flavor it delivers, despite being built in single coil (even though Hellvape advertises it as a dual coil setup).

As for Thunderhead, so far, I've only tried the new Vortex, and despite being a 30mm atomizer, I was surprised by the build quality and the amount of stainless steel used for an atomizer that costs relatively little. So, I imagine their RTAs are built with the same standards.

For MTL vaping, however, it's almost impossible to go for low-cost original atomizers. They are usable, but they all have small design flaws, or the manufacturer cuts corners to keep costs low. Between a clone and an original at the same price, a clone is almost always the better choice, except in cases like the Cabeo, where the cloner doesn't offer the almost essential add-ons available for the original.

If you were looking for an RDTA-style atomizer similar to the Cabeo, the only other experience I have is with the Mato by Vandy Vape. I’m not sure if it’s still available, but it was a great atomizer for the price (I paid less than €20).

 

[conanthewarrior]

I'm fairly new to the RDL rebuildable world, despite having been building MTL setups for six years.

The two RDL/Cloud atomizers from Hellvape that I've tried are the Dead Rabbit 3 RTA and the RDA 3 (dripper). I should be trying another one soon, and I hope it will be on the same level. The DR 3 RTA really impressed me with the flavor it delivers, despite being built in single coil (even though Hellvape advertises it as a dual coil setup).

As for Thunderhead, so far, I've only tried the new Vortex, and despite being a 30mm atomizer, I was surprised by the build quality and the amount of stainless steel used for an atomizer that costs relatively little. So, I imagine their RTAs are built with the same standards.

For MTL vaping, however, it's almost impossible to go for low-cost original atomizers. They are usable, but they all have small design flaws, or the manufacturer cuts corners to keep costs low. Between a clone and an original at the same price, a clone is almost always the better choice, except in cases like the Cabeo, where the cloner doesn't offer the almost essential add-ons available for the original.

If you were looking for an RDTA-style atomizer similar to the Cabeo, the only other experience I have is with the Mato by Vandy Vape. I’m not sure if it’s still available, but it was a great atomizer for the price (I paid less than €20).

I ended up going with an Aspire Kumo from a forum member on here for £12, boxed and in great condition with all the parts that should be there.

I watched all the youtube reviews, and it seems like it will not be too restrictive for me, so I really look forward to trying out this new RDTA with the cool wicking system.

What good MTL RTA clones can you recommend? As I don't mind clones and do not own a MTL RTA in my collection so would like to add one.

 

[Mutley1]

Hello everyone, when I get payed on the weekend I am going to order a steampipes Cabeo RTA clone from China, as the authentic is sold out and also far too expensive, even the clone is $24.99.

Each review I have watched they use a decent sized fused clapton, alien, or similar coil.

I want to get some premade coils that don't break the bank that I can use with the new RTA, and also all of the other ones that I own.

I tend to vape lower wattage, but anything that works well under 50W with a single coil will make me happy.

So if anyone can suggest a website or give me a link to some coils I would be very much appreciated for the help.

Thanks everyone, Conan.

Check out Jag hilly trading

Jag Hilly Trading

Large selection of Vape Wires & Ready made Coils

jagvaping.com

 

[MTB Vaper]

If you want a MTL RTA I'd go for the Cthulhu Valor while there £24 on Ecigone

 

[conanthewarrior]

Check out Jag hilly trading

Jag Hilly Trading

Large selection of Vape Wires & Ready made Coils

jagvaping.com

Thank you! I will check them out now!

If you want a MTL RTA I'd go for the Cthulhu Valor while there £24 on Ecigone

I ended up going for the Aspire Kumo RDTA from someone on here, its a collab with the makers of the RDA clone I was going to get, steampipes.

I will check that out for a MTL RTA though as I currently don't own one and it would be nice to have one, thank you

 

[Infinium]

I watched all the youtube reviews, and it seems like it will not be too restrictive for me, so I really look forward to trying out this new RDTA with the cool wicking system.

I was tempted to buy it back then as well since, if I remember correctly, it was an Aspire x Steampipes collaboration inspired by the Cabeo. Unfortunately, it's no longer available new—you were lucky to get it, and at a great price too