First Unregulated Mod, help me not blow up...

[maher]

So I've bought a Dimitri, nice and cheap for a first unregged I think. Anyway, I understand perfectly fine about Ohm's Law in general vaping practice (ie V/R=A).
My question is relating to series or parallel, and I can't find a bloody straight answer anywhere! If I have my 2 Samsung 25r's in there, fully charged voltage will still be 4.2, but will my amps double? So fully charged would be 20a or 40a? Meaning I could build to lower than .2?

I've watched every battery guide I can get my hands on and still can't quite figure an answer, so I figured better to look stupid and ask than look stupid and dead...

 

[Koeshi]

Okay, I am no techie, but I will tell you what I think is right from what I have seen. In dual parallel you will get the voltage that the battery provides, but the maximum ampage is doubled. In dual series you will get the combined voltage of both batteries, but the maximum amp draw stays the same. If you are unsure why not try with a single battery mod first to get the hang of things?

 

[gerry]

I'm almost 100% sure that in parallel it gives you 1.5x amp limit. So 20a batteries will actually give you 30a limit.

I build my own boxes and this is all still hazy to me tbh but after all the research I have done I will happily work to that theory and never had an issue

 

[vaporsizer]

[video]https://youtu.be/CKfPCJ3ozFs[/video]

 

[Huggett]

Vaping in parallel doesn't double the amps you have, it simply splits the load over 2 x 20A cells.

Each cell can take 20A yes, but you need to remember its split between them. Allow maybe 20% for error

It doubles the mAh, ie you can run longer between charges, same voltage tho