knome
Veteran
- Joined
- Feb 25, 2014
- Messages
- 5,587
Ok, hmmm. I'm struggling with my build in this. It keeps pissing through the 510 or gpin, - I have both. Naturally I keep thinking it's my wicking that's at fault but now I've reached the stage where I'm stumped.
I've tried 30 and 28 awg, all coming in between 1.0 and 1.4 ohms. Tried it with cotton bacon, muji, voodoo and silica, I've tried it with the tails flicked the tails up inside the chamber, had them protruding outside a bit, had them bang on level with the chamber. All the times the wick is enough to give just a bit of resistance but it's still pissing through.
Anybody else had this ? I don't know what else to try
I'll try and post up some picks of my build tomorrow, but only got a crappy phone camera, so they don't come out too well
Leaks through the 510 don't sound like a wicking issue. Have you checked all the parts and o-rings shown in the reference guide?...
Mine tends to leak past the o-ring on the top of the base cap which fits in the chimney.
Last edited by a moderator: