I will normally drop some liquid at the opening at the top opening. 3-4 drops. I will then squeeze some drops from the side part where the cotton is exposed.As said, not familiar with the coils but would have thought they are generally “okay”, if not spectacular. Some juices can be coil killers, but not a couple of ml in!
Talk us through your priming regime using the vw mod, including wattages. That might help.
Good (and assume you mount the coil in the tank and fill it) and what then? - wattage etcI will normally drop some liquid at the opening at the top opening. 3-4 drops. I will then squeeze some drops from the side part where the cotton is exposed.
I then let the device stand for 10 mins ( or longer if needed).
Yep..once filled up, I will start around 8-9 watts...all the way till about 11. Normally don't go higher 10-12 watts.Good (and assume you mount the coil in the tank and fill it) and what then? - wattage etc
I break my could in a lot “slower” than that.Yep..once filled up, I will start around 8-9 watts...all the way till about 11. Normally don't go higher 10-12 watts.
Copying their marketing for the battery if that helps:I break my could in a lot “slower” than that.
Start at 5w - a few non-fired good draws to maybe “pull” the juice through.
3 or 4 light draws with a good pause between and going up .5 watt at a time.
And that’s all preceded by a minimum 30 minute sit of the primed coil in a full tank.
Works for me, but everyone will have their own regime.
And the problem you’ll likely behaving with the battery mod is that you have no idea what wattage it’s firing at and no way to adjust it. It may be a bit to much for the coil/juice combination.
i recon this could be a coil issue as last time i used the s22 the coils were lasting me around 2 months and that was using now defunct nova vapes grape ice which was quite sweet.I am using a Series S22 battery https://www.jacvapour.com/e-cig-batteries/series-s-batteries. This is my daily driver due to how light it is with no need for playing around.
And have tried both MTL or DL.
I have observed the issue in both types of coils!
But no mention (or control) of wattage. I’m guessing that the mod “reads” the resistance and put out a wattage based on some algorithm on the chip.Copying their marketing for the battery if that helps:
Boasting a huge 2600mAh capacity in its compact frame, our S22 vape battery will last the average vaper all day before needing to be recharged.
This sub-ohm capable workhorse is designed to work best with our S22 topfill tank, and will support coils rated as low as 0.5Ω.
Designed right here in the UK by JAC, and comes with a 6 month warranty.
S22 Vape Pen Specifications
Dimensions – 82mm (H) x 22mm (W) 27mm (L)
Power – Unregulated 3.1v – 4.2v (3.7v nominal)
Capacity – 2600mAh
Min resistance – 0.50hm
Materials – 303 steel alloy, matte black PVD finish, ABS/polycarbonate button with rubber oil finish
Five click lock
USB-C charging (requires a USB-C charging lead)
Overcharge protection
Short circuit protection
Battery vents
Pass thru functionality