Mech advice

[Falcon Fx1]

I was brought the Bonza 1.5 kit as an early birthday gift and wondered what the best resistance and batteries are to use ( 1st time mech user ) any advice would be appreciated....

 

[mattyk2010]

Samsung 30T will give you a nice high Amp limit to work with but we need to know more info,
what kit do you usually use?
What ohm coils?
And what wattage?

 

[cliveh2]

30t or molicel from fogstar but as matty said need more detail

 

[Falcon Fx1]

Afternoon Matty

I'm currently using the voopoo drag V2 with the Goon 1.5 rda also using pre built coils that ohm out roughly between 0.2- 0.25 I also use the falcon King sub ohm tank the coil resistance is usually around 0.15 - 0.17.

Thank you for taking the time to assist/advise it's most appreciated.

 

[Vapaneezer Scrooge]

Go straight to the designer, though it's worth watching his Tubes for Noobs video also.
(He recommends the Samsung 30T)

 

[mattyk2010]

Afternoon Matty

I'm currently using the voopoo drag V2 with the Goon 1.5 rda also using pre built coils that ohm out roughly between 0.2- 0.25 I also use the falcon King sub ohm tank the coil resistance is usually around 0.15 - 0.17.

Thank you for taking the time to assist/advise it's most appreciated.

Still missing a important factor though bud, what sort of power you putting through them coils? Only asking (especially for the goon) because I don't want to advise a build that would be either underpowered and leave you dissatisfied or overpowered and losing a lung for the sake of a vape [emoji3]

 

[Falcon Fx1]

With the goon I’m vaping it around the 70 watt range the drag V2 has a automatic resistance reader and will auto set a wattage for the build installed. I usually bump it down to 70w as anything over 70w usually gets a bit hot weather it be the rda or the top of the mod

 

[cliveh2]

With the goon I’m vaping it around the 70 watt range the drag V2 has a automatic resistance reader and will auto set a wattage for the build installed. I usually bump it down to 70w as anything over 70w usually gets a bit hot weather it be the rda or the top of the mod

What sort of build do you intend to use in the bonza? 0.25 is roughly going to be 70 watts off the top of my head, have you used a mech before?

Just read 1st time user [emoji16]

 

[Falcon Fx1]

not used a mech mod before and haven’t used the bonza kit as of yet I still need to acquire some 21700 batteries.... as it will be my first time using hybrid mech device I just want to make sure I have a safe set up and build resistance ( dont wanna go and blow me hand off first time out lol )

So I appreciate any tips and advice.

 

[mattyk2010]

What sort of build do you intend to use in the bonza? 0.25 is roughly going to be 70 watts off the top of my head, have you used a mech before?

Just read 1st time user [emoji16]

50 of those watts are gonna be lost inside the nerf tube so he might wanna build down to .2 to compensate for the voltage theft of the kit [emoji23]