Mwahahaha it's alive!

[deepsrepus]

Just finished build my first dripper, I'm so impressed with how it turned out any tips for improvement?
2 X twisted kanthal a1 28 gauge
coil diameter 1.5mm
5 wraps
0.5 Ohms





Again any tips on how to improve?

 

[eshelby_dunn]

Good show fella, can't help with any tips though (still a novice myself with coils) as long as they fire and give a good vape I'm happy!

 

[deepsrepus]

Good show fella, can't help with any tips though (still a novice myself with coils) as long as they fire and give a good vape I'm happy!

The vape is excellent, thing is now I'm rinsing through liquid at a rate of knots

 

[eshelby_dunn]

The vape is excellent, thing is now I'm rinsing through liquid at a rate of knots

An unfortunate side effect I'm afraid. Now you should start (if you haven't already) mixing your own, to help keep costs down

 

[deepsrepus]

An unfortunate side effect I'm afraid. Now you should start (if you haven't already) mixing your own, to help keep costs down

I'm planning to start over the summer, it's something I've wanted to try for a while now

 

[Chegs]

More vapour requires more juice to create them.Simplez

 

[remnant]

If you're happy with your vape, then it's mission accomplished. You could probably get more flavour and maybe lower juice consumption with a higher resistance coil, by increasing the number of wraps and/or using thinner kanthal and/or wrapping around something a bit larger - if that's what you want.

What's the dripper, btw? Can't tell from the pictures, at that angle.

 

[deepsrepus]

If you're happy with your vape, then it's mission accomplished. You could probably get more flavour and maybe lower juice consumption with a higher resistance coil, by increasing the number of wraps and/or using thinner kanthal and/or wrapping around something a bit larger - if that's what you want.

What's the dripper, btw? Can't tell from the pictures, at that angle.

https://www.fasttech.com/p/1406704