My Tin Mod with USB Charger

[RicModMaker]

I get as much satisfaction messing about with bits n pieces,cures my craving for hours.I'm thinking less about the vaping whilst searching the net for items.

As for LiPo supplies,I'm undecided whether to go for a combi-pack(11+ volts)or a parallel configuration for one charge = 1 weeks vaping

Whichever configuration I finally choose,I'll definitely need a bloody good RDA for it(such as Zenith V2)or I'm going to find my positive post becoming loose(as the insulator melts)the instant I hit the fire button.

Lol. The way I'm thinking of it is that I'm simply going to double the power and then double up the coils so the ohms are about double what I usually vape. I'm quite happy with my 1 ohm coils so 2 of those will be twice as much vapour. I don't think you need to worry about the insulator Chegs, as long as the wick is wet, it won't get much hotter than it does already.

 

[Chegs]

Seedy

I had a cheap n cheerful RDA from FT,the centre-post insulator gradually turned into a puddle of misshapen plastic that still worked it's magic though the 3 posts were pointing in various directions.I then got a UD-W that I built dual 0.35mm coils on(0.8 ohms too)and when I applied a little extra pressure to the centre-pin screw to tighten it down on the coils the pin started turning,so I stripped it again & discovered that the centre-post insulator had again,melted.This time the melting had caused a short,so I remembered I'd some silicon tube & was fortunate that my tubing was a bloody good replacement for the melted insulator(although the post still turns occasionally)I believe Raguri also experienced a few RDA's with heat issues on several of his devices.I went looking for a Zenith V2 last night,and was pleased to see that the insulators are described as "extremely high temperature resistant" and the reviewer's only "criticism" was the cyclops air holes go from "perfect size for him,to cloud chaser spec in under a quarter turn"

 

[RicModMaker]

I'm in the market for a new one. Not sure which way to jump but defo don't want a melter. Still got designs on a double 18650 so at least a dual coil puppy. Would like to be able to open up the airflow, preferably without drilling. Also would like holes in the posts.
So dual coil capability, post holes and adjustable airflow. Any recommendations?

 

[5miley]

I am in the process of building a dual 18650 mod, actually gathering more bits.
I keep reading about new bits that can be added on so am waiting for those bits to be delivered

1. Voltmeter .... delivery
2. Mosfet on/off switch ... waiting
3. Fibre optic cable ... waiting

 

[Coolair]

Very nice

 

[RicModMaker]

Thanks Coolair :-)
Me too 5miley. Got mosfets, switches and loads of other bits coming. Another USB charger one in a small hammond enclosure. Not sure what I'm going to put th big guns in as it needs to be easily opened because I can't find a 8.4v charger board. I've been scanning Chinese sites looking but it doesn't exist. I've also got concerns about using the stepdown boards I've got because on the amp limits. Nothing I've found will go above 4a so pretty useless for a power mod.

 

[Ninjaassasin1983]

My second mod. Pretty happy with it.
It's got an onboard USB charger.

View attachment 22117View attachment 22118View attachment 22119View attachment 22120View attachment 22121View attachment 22122View attachment 22123View attachment 22124

USB Charger shorting. Moved it a bit inside, glued and a bit of insulation tape.
View attachment 22135

That looks fantastic

Sent from my HTC One X using Planet of the Vapes mobile app

 

[RicModMaker]

That looks fantastic

Sent from my HTC One X using Planet of the Vapes mobile app

Cheers fella. I melted a few things along the way. Standard seedy business :-)

Sent from somewhere just south on our nations capital.