What's new

VapeCige VTBox200

rob-o-cop said:
Righty then

Replacement mods will be shipped next week
Yeeeeeeeeeeeeeeeeeeee

But im sorry to say that you gonna have to send the bad ones back to me, so i can send them back to VapeCige
However, i requested 2 extra units, to covver all the shipping expences by you guys, and me sending them back to China, so i will be refunding the postage money to all of you with the faulty mods for sending them back to me, as soon as i sell the extra mods :):)

This is what i got just now, and i hope for the best for all of us
As always, i will keep you posted on any progress

EDIT
Please don't send them back before Tuesday next week.
I will PM the return address to all of you soon-ish, but we are getting away for the bank holiday weekend, so we will not be able to receive them

Sorry for the inconvenience

EDIT AGAIN
They will ship the new mods, even if i dont ship the bad Ones next week, so sending them back to me will not reflect on anything
Click to expand...

I am willing to have sex with you.

It will be deeply unrewarding, over in less than a minute and then I'll cry for an hour - but the offer is there.

You are a God of a man.
 
meeesterjoe said:
There's a cracking website dedicated to these types of scams, it's called

419 Eater - The largest scambaiting community on the planet!

Mainly Nigerian scammers being led on to do some well funny stuff in the hope of getting your cash.
Check it out, it's hilarious.
Click to expand...

Scambaiting was hobby of mine for a while.
I was Reverend Plonker, looking to start a Church of the Meat Gozer in Nigeria.
I even had a few 'monuments of faith' built to show their commitment :D
 
rob-o-cop said:
Righty then

Replacement mods will be shipped next week
Yeeeeeeeeeeeeeeeeeeee

But im sorry to say that you gonna have to send the bad ones back to me, so i can send them back to VapeCige
However, i requested 2 extra units, to covver all the shipping expences by you guys, and me sending them back to China, so i will be refunding the postage money to all of you with the faulty mods for sending them back to me, as soon as i sell the extra mods :):)

This is what i got just now, and i hope for the best for all of us
As always, i will keep you posted on any progress

EDIT
Please don't send them back before Tuesday next week.
I will PM the return address to all of you soon-ish, but we are getting away for the bank holiday weekend, so we will not be able to receive them

Sorry for the inconvenience

EDIT AGAIN
They will ship the new mods, even if i dont ship the bad Ones next week, so sending them back to me will not reflect on anything
Click to expand...

No Worries Rob, once you're ready I'll pop it in the post, I'm assuming First class recorded will be correct and the address will be the Return address on the sticky label on the back of the Jiffy bag?
 
Tubbyengineer said:
No Worries Rob, once you're ready I'll pop it in the post, I'm assuming First class recorded will be correct and the address will be the Return address on the sticky label on the back of the Jiffy bag?
Click to expand...

Being the tight arsed Scotsman that I am I will probably reuse said Jiffy bag to return [emoji1]
 
Thought Id post this for those that didn't even get a chance to turn there's on and have a go.

The DNA 200 is a remarkable and very customisable chip. The VT Box it is wrapped in is very nice to use. And the EScribe software makes customising the device straightforward.

My VT (soon to be returned) has a number of issues, but it did at least fire up when I got it. Unfortunately, the lipo is swollen so much the battery door won't sit flush.

Nevertheless, I did try the box out and went through most of the software options to test things out, once I'd checked to ensure that each cell was ok via Device Monitor in EScribe.

I used 3 different tanks and a dripper with Ni200 coils during my tests and found perfect settings for each, which I then set as separate profiles via the software.

I checked coil resistance readings and they match exactly, the readings obtained using a Sigelei 150 TC and a Snow Wolf

The range of customisable features meant that I could fine tune a perfect vape (for me) on all 4 tanks and switch easily via the saved profiles.

I found that tweaking the preheat power and punch really smoothed out the vape. I wasn't expecting too much difference but the back to back tests against the Sigelei highlighted just how much smoother the vape was. I've also found that I can raise the wattage higher than I would normally vape on the other devices and maintain a smooth, more flavoursome vape and with more cloud.

In all in, it has raised the vape experience another notch for me personally. In fact, I really didn't like drippers due to the initial spit and heat experienced, but was able to customise a profile that transformed the vape.

I'm really looking forward to receiving a properly built VTBox because from this very brief experience, this device will certainly become my go to mod.

If Vape Cige can show that they really can build a quality device I would even consider buying another if and when funds allowed.
 
beeky said:
Thought Id post this for those that didn't even get a chance to turn there's on and have a go.

The DNA 200 is a remarkable and very customisable chip. The VT Box it is wrapped in is very nice to use. And the EScribe software makes customising the device straightforward.

My VT (soon to be returned) has a number of issues, but it did at least fire up when I got it. Unfortunately, the lipo is swollen so much the battery door won't sit flush.

Nevertheless, I did try the box out and went through most of the software options to test things out, once I'd checked to ensure that each cell was ok via Device Monitor in EScribe.

I used 3 different tanks and a dripper with Ni200 coils during my tests and found perfect settings for each, which I then set as separate profiles via the software.

I checked coil resistance readings and they match exactly, the readings obtained using a Sigelei 150 TC and a Snow Wolf

The range of customisable features meant that I could fine tune a perfect vape (for me) on all 4 tanks and switch easily via the saved profiles.

I found that tweaking the preheat power and punch really smoothed out the vape. I wasn't expecting too much difference but the back to back tests against the Sigelei highlighted just how much smoother the vape was. I've also found that I can raise the wattage higher than I would normally vape on the other devices and maintain a smooth, more flavoursome vape and with more cloud.

In all in, it has raised the vape experience another notch for me personally. In fact, I really didn't like drippers due to the initial spit and heat experienced, but was able to customise a profile that transformed the vape.

I'm really looking forward to receiving a properly built VTBox because from this very brief experience, this device will certainly become my go to mod.

If Vape Cige can show that they really can build a quality device I would even consider buying another if and when funds allowed.
Click to expand...

Cheers Paul, I will be looking to you for advice on customising when the replacements come through
 
You must log in or register to reply here.

Similar threads

philTBA
VTbox200 **SOLD**
2
Replies
18
Views
1K
philTBA
philTBA
efun.top
Vapecige VTbox 200W Temperature Control DNA 200 $149.99
Replies
0
Views
773
efun.top
efun.top
rune
DNA200 - Up and coming devices thread
4 5 6
Replies
55
Views
22K
rune
rune
philTBA
1th.
2
Replies
18
Views
740
paul-7
paul-7
Back
Top Bottom