VTbox200 replacement LiPos

[sganatra]

I hardly use mine. May be up for sale if anyone is interested?

 

[florian85]

Hallo, ive a VTBox200 with Screws door and T-Plug / Deans Plug.
So my question which Lipos are fits into? When ill use the Turnigy 1300mah 25-50c and a xt60 to T-Plug connector fits it ?
Have look with google for Lipo with T-Plug/Deans Plug that fits, but one is in ebay us and one is in ebay uk, they are not shipping to germany ((
Dont know what i can do to replace the crap Lipo thats inside.

 

[city461]

Hallo, ive a VTBox200 with Screws door and T-Plug / Deans Plug.
So my question which Lipos are fits into? When ill use the Turnigy 1300mah 25-50c and a xt60 to T-Plug connector fits it ?
Have look with google for Lipo with T-Plug/Deans Plug that fits, but one is in ebay us and one is in ebay uk, they are not shipping to germany ((
Dont know what i can do to replace the crap Lipo thats inside.

First message the seller on ebay.. most are pretty good and maybe he can post to Germany but just doesn't list it..

 

[philTBA]

Hallo, ive a VTBox200 with Screws door and T-Plug / Deans Plug.
So my question which Lipos are fits into? When ill use the Turnigy 1300mah 25-50c and a xt60 to T-Plug connector fits it ?
Have look with google for Lipo with T-Plug/Deans Plug that fits, but one is in ebay us and one is in ebay uk, they are not shipping to germany ((
Dont know what i can do to replace the crap Lipo thats inside.

The nano techs may be a bit tight if there's a deans to xt60 adapter plug needed. You may need to shorten the battery leads, but if you going to do that, you may as well just swap to the correct plug.

 

[florian85]

Have contact seller and from us and uk are no shipping to germany from ebay sellers
to fit the cables self is not my, think i will better buy battery thats fits from self

 

[VisforVendetta]

Wow! I finally found someone who can help me. I need to know the size of the battery compartment. Gonna order the VT Box 250 for $100 then upgrade the battery. I was thinking Graphene battery pack but it looks too tall unless I can modify the battery tray. (Might just get a custom battery tray 3d printed)
So.... Battery compartment size and photos of the tray would be greatly appreciated.
Thanks from across the pond.

 

[VisforVendetta]

Wow! I finally found someone who can help me. I need to know the size of the battery compartment. Gonna order the VT Box 250 for $100 then upgrade the battery. I was thinking Graphene battery pack but it looks too tall unless I can modify the battery tray. (Might just get a custom battery tray 3d printed)
So.... Battery compartment size and photos of the tray would be greatly appreciated.
Thanks from across the pond.

 

[jock1092]

Wow! I finally found someone who can help me. I need to know the size of the battery compartment. Gonna order the VT Box 250 for $100 then upgrade the battery. I was thinking Graphene battery pack but it looks too tall unless I can modify the battery tray. (Might just get a custom battery tray 3d printed)
So.... Battery compartment size and photos of the tray would be greatly appreciated.
Thanks from across the pond.

Can't comment on the battery area size but generally the turnigy-nano-tech-300mah-2s-45-90c-lipo-pack.html nanotech are smaller than the graphene but with a lower C rating
The 250 needs 30amp so use that as a base, I used one rated closer to 25a and it was fine, but that wasn't in a vt box

 

[VisforVendetta]

I want to use the
Turnigy Graphene 1300mAh 3S 65C because the voltage drop basically is equivalent to a 1500 or 1600 milliamp hours regular lypo pack. DNA 250 board requires 40 amps discharge rate this battery pack is roughly 80. Also the charge rating needs to be at 2 amps or above otherwise it will take forever to charge. Most people don't realize that the settings in the evolve software determine how fast your battery will charge.
The main reasons for changing the battery are as follows better life and no strain on the battery at all whatsoever. This battery is almost twice the discharge rate needed by the board and will charge over 10 times faster then the board allows. My brother has a DNA that has problems with overheating due to an insufficient battery pack. I love high wattages and I hate triggering thermal protection cutouts. This battery will solve those issues.

 

[MrZero]

I want to use the
Turnigy Graphene 1300mAh 3S 65C because the voltage drop basically is equivalent to a 1500 or 1600 milliamp hours regular lypo pack. DNA 250 board requires 40 amps discharge rate this battery pack is roughly 80. Also the charge rating needs to be at 2 amps or above otherwise it will take forever to charge. Most people don't realize that the settings in the evolve software determine how fast your battery will charge.
The main reasons for changing the battery are as follows better life and no strain on the battery at all whatsoever. This battery is almost twice the discharge rate needed by the board and will charge over 10 times faster then the board allows. My brother has a DNA that has problems with overheating due to an insufficient battery pack. I love high wattages and I hate triggering thermal protection cutouts. This battery will solve those issues.

Man, I really looking for this thread VT BOX 250 Battery and you show off. Did you change the battery of VT BOX 250 with the Turnigy Graphene 1300mAh 3S 65C without any modification such as short the cable or peeling the wrap ? and also after change the battery should change the settings on EScribe ? Thanks man, I really wanted to know about that ...