Coil build.

[Eddy2011]

Hello everyone ,I'm a bit new to building my own coil deck and just want to know what sort of duel coil build would you use on a sub ohm tank running around the 60 watt mark .?
Bloke in the shop suggested 2x
0.6 coils...does this OK?.
Cheers .

 

[Deleted member 54254]

Will this be on a regulated mod? If you don't know what I mean just tell us the mod and tank names.

 

[30deadcats]

There's a few things that affect the wattage required but as a general starting point I use the 1ohm = 14 watts, 0.5 ohms = 28 watts, 0.33 ohms = 42 watts 0.25 ohms = 56 watts etc. Basically 14 divided by your resistance will give approx 3.7 volts. Start there and adjust up or down until you're happy with the vape. Anything up to about 20% up or down from your starting point. This is really rough but it works for me.

 

[30deadcats]

Hello everyone ,I'm a bit new to building my own coil deck and just want to know what sort of duel coil build would you use on a sub ohm tank running around the 60 watt mark .?
Bloke in the shop suggested 2x
0.6 coils...does this OK?.
Cheers .

For your dual 0.6 ohm coils you should end up with a resistance approx 0.3. 14 divided by 0.3 = about 48 so I'd try 48 watts and then play about from there.

 

[Eddy2011]

It's a freemax mod with a dead rabbit 3 rta

Will this be on a regulated mod? If you don't know what I mean just tell us the mod and tank names.

 

[Eddy2011]

For your dual 0.6 ohm coils you should end up with a resistance approx 0.3. 14 divided by 0.3 = about 48 so I'd try 48 watts and then play about from there.

I will give it a go ..and thankyou for the info ...bloody accomplicated these coil builds .

 

[Deleted member 54254]

Is that the maxus solo 100W ?

 

[Eddy2011]

Is that the maxus solo 100W ?

Is that the maxus solo 100W ?

It's the maxus 200w mod .

 

[Deleted member 54254]

Freemax Maxus 200w VW Mod

• Output voltage 0.7-8.4V
• Input voltage 3.3-4.2V (single battery) 6.6-8.4V (dual battery)
• Output wattage 5-200W 100-315 Celsius 200-600 Fahrenheit
• Output mode Power/VPC/Bypass/TC – TI-SS-NI /TCR
• Resistance range 0.1-3.0ohm
• Battery 18650×2 (Smart Load Tech) Support for 18650×1
• Charge specification 5V/2A
• Size 90 x 52.5 x 28.6mm
• Weight 190g
• Material Zinc alloy/stainless steel/Delrin

 

[Deleted member 54254]

That basically tells you the mod will fire at anything between 0.1 and 3.0 ohms, it's regulated, so you can dial it into what you're happy with watts-wise.