workshyfop
Achiever
- Joined
- Mar 21, 2015
- Messages
- 1,608
paypal G&S, courier delivery.
UK retail billet box: around £320 typical.
spare SXK boros £15 each naturevape
£165 delivered to your address of choice.
i hardly used the SXK billets i had, same with this. as nice as they are i prefer higher watts and more airflow hence the sale.
in the interest of transparency, so you know the history behind this:
was purchased on here in January from this thread:
https://www.planetofthevapes.co.uk/...-poo-rev-4b-dna60-bundle.191113/#post-2146242
sold the vapeshell on for £40 and the A Tank for £10 on ebay auctions as they were surplus to requirements.
so the rest owed me £140.
its had a replacement screen fitted which cost £15 delivered for the part.
so it owes me £155 without the bits i have added.
theres also 4 SXK boros added by myself and a couple of other bits, which accounts for the asking price just so everyone is aware theres no profiteering going on here.
its was stripped and cleaned out with electrical cleaner as it was either suffering from condensation ingress or had had a leaking boro, the board was cleaned at the same time and left to dry for a few days after cleaning to ensure all traces of the cleaning fluid had evaporated.
the rubber cover at the rear of the up/down buttons is as it should be.
the screen was replaced at this time as the ribbon cable was giving intermittent connection as is often the case with the DNA screens once the cable is disturbed from its original placement.
there was no traces of any corrosion evident on any of the internals. this was carried out a couple of days after it arrived with me. theres was no pools of liquid in the device, just a small trace noticeable around the join of the control panel at the bottom of the mod which prompted me to attend to it.
since then, i have only used it a few times with the condensation plug in situ. the boro has always been removed when not used so its dry as a bone still.
so theres the billet box with the original black boro from when i purchased it.
theres a genuine boro seal and some o rings. the hybrid tip, and 2 screw in 510 adaptors (the other hybrid tip turned out to be a 510 in the standard type adaptor)
theres the genuine OCC coil adaptor, but i threw out the bottom ring with the OCC coil but theres a brand new SXK complete OCC adaptor in there so the bottom ring of that can be used.
stuff i am putting with it:
sxk nautilus adaptor, SXK kanger OCC adaptor, 4 SXK boro tanks (2 white, 2 black) think 3 are unused, 3 condensation plugs (MTL & DTL sizes) and 3 SXK tank seal/o rings.
plenty of pictures showing all angles of the billet box so you can see exactly how decent it is.
the boot up screen is shown, as well as the tank connection so you can see its a genuine one and also the SKX 510 tip screw in things DO NOT fit this.
first 2 pictures are outdoors and give a better idea of the colour, its more purple than pink. great colour in the flesh.
It's the DNA60, forgot the mention that.
UK retail billet box: around £320 typical.
spare SXK boros £15 each naturevape
£165 delivered to your address of choice.
i hardly used the SXK billets i had, same with this. as nice as they are i prefer higher watts and more airflow hence the sale.
in the interest of transparency, so you know the history behind this:
was purchased on here in January from this thread:
https://www.planetofthevapes.co.uk/...-poo-rev-4b-dna60-bundle.191113/#post-2146242
sold the vapeshell on for £40 and the A Tank for £10 on ebay auctions as they were surplus to requirements.
so the rest owed me £140.
its had a replacement screen fitted which cost £15 delivered for the part.
so it owes me £155 without the bits i have added.
theres also 4 SXK boros added by myself and a couple of other bits, which accounts for the asking price just so everyone is aware theres no profiteering going on here.
its was stripped and cleaned out with electrical cleaner as it was either suffering from condensation ingress or had had a leaking boro, the board was cleaned at the same time and left to dry for a few days after cleaning to ensure all traces of the cleaning fluid had evaporated.
the rubber cover at the rear of the up/down buttons is as it should be.
the screen was replaced at this time as the ribbon cable was giving intermittent connection as is often the case with the DNA screens once the cable is disturbed from its original placement.
there was no traces of any corrosion evident on any of the internals. this was carried out a couple of days after it arrived with me. theres was no pools of liquid in the device, just a small trace noticeable around the join of the control panel at the bottom of the mod which prompted me to attend to it.
since then, i have only used it a few times with the condensation plug in situ. the boro has always been removed when not used so its dry as a bone still.
so theres the billet box with the original black boro from when i purchased it.
theres a genuine boro seal and some o rings. the hybrid tip, and 2 screw in 510 adaptors (the other hybrid tip turned out to be a 510 in the standard type adaptor)
theres the genuine OCC coil adaptor, but i threw out the bottom ring with the OCC coil but theres a brand new SXK complete OCC adaptor in there so the bottom ring of that can be used.
stuff i am putting with it:
sxk nautilus adaptor, SXK kanger OCC adaptor, 4 SXK boro tanks (2 white, 2 black) think 3 are unused, 3 condensation plugs (MTL & DTL sizes) and 3 SXK tank seal/o rings.
plenty of pictures showing all angles of the billet box so you can see exactly how decent it is.
the boot up screen is shown, as well as the tank connection so you can see its a genuine one and also the SKX 510 tip screw in things DO NOT fit this.
first 2 pictures are outdoors and give a better idea of the colour, its more purple than pink. great colour in the flesh.
It's the DNA60, forgot the mention that.
Last edited:
