Help with DotMod AIO V2

[W30RTY]

My coil is a couple of mm above the airpin, have you experimented with it. Oh and iirc those liquids are 70/30, maybe not the best for MTL where you maybe want 50/50

sorry I meant the 10ml 10mg nic salt versions haha they are 50/50 - and I have been positioning the coil level with the posts- do you think it needs lowering?

 

[Deleted member 54254]

Experiment

 

[W30RTY]

Experiment

Do I have to rewick to move the coil down? Or can I just push it?

 

[Deleted member 54254]

As long as you can see the gap by lifting the wick tail, I'd just push/lift it.

 

[Mitch2471]

Can't say I've tried the bp but I have tried multiple top fed tanks & they generally all work better with less cotton. After your cotton has been soaked & bedded in it will swell/enlarge & can get to tight in the coil which leads to muted flavour.
I would start with the minimum cotton you can use without causing the tank to flood & work from there. There are so many variables that the only way to deal with it is through trial & error.

 

[W30RTY]

Can't say I've tried the bp but I have tried multiple top fed tanks & they generally all work better with less cotton. After your cotton has been soaked & bedded in it will swell/enlarge & can get to tight in the coil which leads to muted flavour.
I would start with the minimum cotton you can use without causing the tank to flood & work from there. There are so many variables that the only way to deal with it is through trial & error.

thanks for the help Mitch! Looks like I’m just gonna have to have a play about and see how it goes

 

[W30RTY]

My 1.0 nautilus coils have come now not sure if they are great though- I am using a dessert based nic salt so maybe it’s just that- I may buy some 0.7’s and see how they are

 

[W30RTY]

Can't say I've tried the bp but I have tried multiple top fed tanks & they generally all work better with less cotton. After your cotton has been soaked & bedded in it will swell/enlarge & can get to tight in the coil which leads to muted flavour.
I would start with the minimum cotton you can use without causing the tank to flood & work from there. There are so many variables that the only way to deal with it is through trial & error.

well I took your advice I used as little cotton as I could and still getting just airy mouthfuls with little flavour- honestly about to give up with it haha

 

[W30RTY]

I also seem to be getting juice buildup at the back of my mod

 

[John R Phillips]

That’ll be condensation - goes with the nature of Boro/AIO devices