RDA's fused shut from not being used- how to get them apart.

[conanthewarrior]

Failing that. Wd40. Just make sure you clean it well before firing it. It smells nice. But don't vape to well.

I tend to use the build deck that I got with my taifun GT. And wiggle.

Also had some good results from stuck gear with dropping ice into the deck. If it's an rda obvs.

WD40 saved me yesterday, I would have preferred to use electrical contact cleaner but had none and the plus button on my Hotcig DX200 DNA200 got stuck- a forum member recommended trying WD40 so I sprayed with the included red straw nozzle thing a very quick spray- this was still enough to cover the plus and minus buttons and nearly get into the USB port, but I pressed the stuck button a couple of times and success!
The button popped back out and is working perfectly now.

Do you mean literally dropping a piece of ice into the deck, if so how do you get it past the drip tip section lol?

 

[animal.]

WD40 saved me yesterday, I would have preferred to use electrical contact cleaner but had none and the plus button on my Hotcig DX200 DNA200 got stuck- a forum member recommended trying WD40 so I sprayed with the included red straw nozzle thing a very quick spray- this was still enough to cover the plus and minus buttons and nearly get into the USB port, but I pressed the stuck button a couple of times and success!
The button popped back out and is working perfectly now.

Do you mean literally dropping a piece of ice into the deck, if so how do you get it past the drip tip section lol?

If your using a dropper it works almost every time. But with a rta rdta. Not a possibility unless you make really tiny ice cubes

 

[conanthewarrior]

If your using a dropper it works almost every time. But with a rta rdta. Not a possibility unless you make really tiny ice cubes

Lmao that made me chuckle, no I meant on standard RDA's- some of mine have really small drip tips, like this for example- I guess you could crush the ice up and pour it in still?
EDIT: That is only a 22MM RDA so the drip tip looks bigger than it actually is

 

[Mothermilker]

I got into my bonza after a steep in boiling water and pliers wrapped in a sock lol. Forgot how good an rda is

 

[conanthewarrior]

I got into my bonza after a steep in boiling water and pliers wrapped in a sock lol. Forgot how good an rda is

I'm glad that worked for you mate! Is it your only RDA then and what build did you put in it?

 

[Mothermilker]

I'm glad that worked for you mate! Is it your only RDA then and what build did you put in it?

It's my only rda that I don't have a sqonk pin in and I can't find my sqonker anywhere! Put a dual fused clapton in it at 0. 2ohms

 

[animal.]

You can't beat an RDA. But my new smoke detectors don't like them lol. Not the Mrs. Love the Kennedy 25. Epic little beast especially in hybrid. Pin sat straight in the battery. Almost zero drop with the uprated gold pin.

 

[conanthewarrior]

You can't beat an RDA. But my new smoke detectors don't like them lol. Not the Mrs. Love the Kennedy 25. Epic little beast especially in hybrid. Pin sat straight in the battery. Almost zero drop with the uprated gold pin.

When you say pin sat straight in the battery you do mean the positive is protruding right?

 

[animal.]

Of course. So a hybrid attachment is a replacement for the 510 on a mech. So it looks like a threaded washer. You screw that to the bottom of your dripper. Then that screws into to top of your mod. So now. Your positive contact for your mech. Becomes the firing pin of your atty. Obviously not suited to all mods or atties. And some adjustment required so it's producing enough not to cause a hard short.

But looks amazing when you have a seamless mod and atty set up. Especially with the Kennedy 25mm set up and a brass slam/comp cap on.

 

[conanthewarrior]

Of course. So a hybrid attachment is a replacement for the 510 on a mech. So it looks like a threaded washer. You screw that to the bottom of your dripper. Then that screws into to top of your mod. So now. Your positive contact for your mech. Becomes the firing pin of your atty. Obviously not suited to all mods or atties. And some adjustment required so it's producing enough not to cause a hard short.

But looks amazing when you have a seamless mod and atty set up. Especially with the Kennedy 25mm set up and a brass slam/comp cap on.

I have plenty of hybrids mate, I was making sure you knew to have the positive pin protruding was all as I didn't want you to end up in a dead short and venting/thermal runaway situation.

The mech I received today is a standard 510, hits hard, I can't say I notice my hybrids hitting harder. With my Wotofo phantom it comes with a standard 510 top and also a hybrid top, I always use it with the 510 top as I prefer them for some reason.