vapesmarter
Mod Maker
- Joined
- Jun 12, 2016
- Messages
- 6,973
this build has been a real dig deep build
a hoover was sacrificed 3 boards were used Alfie's tail was stepped on a sky box died......
ready?
really?
we shall begin..
upon this night we are watching "Signs" on the DVD (i watched the matrix films a dozen times already)
Graham Hess: Everybody in this family needs to just calm down and eat some fruit or something.
the above was very apt
so the matrix theme is black and green
the wood is Alder the colours are black x 3 green x 4 of which 2 were a pearl and a metallic
the resin spins with the rotation of the earth I'm not kidding here its spins the same direction as the water down a plug hole it does this as the catalyst heats up if we were in Australia it would go the other direction
this is the block pre sanded
lots of drilling the panel will be on the side the mod is rounded both sides like a flask style
those are 1.6mm screws for the top plate which is going to be copper
cutting down for the side switch which is going to be in copper also.
now problem originally this was going to be a DNA 250 so I ordered one and it arrived once fitted it said "warranty service" hmm I got onto evolv and they said you need 2 batteries it won't run on one, shit the mod is made I can't go back. in situations like this, my temper gets the better of me and the Hoover which I use in the workshop, I'm afraid bought it. yes, the hoovers today can't cut it against a brick wall they tend to smash into many pieces. I stomped into the house stepping on Alfie's tail by accident, to be told the sky box is buggered.....not a good day.
now @kamido is an understanding chap and said go with the dna75 which I ordered and fitted this board came from another supplier and turned out to be shagged knackered kaput shit again Alfie looked at me wearily the Hoover looked at me in disgust and the sky box is still buggered.
DNA board no 3 is perfect thank god and so we have the first mock up
notice the matrix code ... it needs a finish and a polish to become
oh the bits are dust on the mod I had an extractor going at the time of the pictures (Hoover bust remember)
but we need something to put the mod in something matrix themed
it has the same greens as in the mod
Neo a DNA 75 copper stabwood hybrid mod..........done
@kamido Neo is ready for you
I have some thanks here to give @jock1092 he's is a diamond @eshelby_dunn my good friend and confident @Greebo who I moan too endlessly and rob at stealth vape who once again got me out of the shit
next time we have maybe 3 things Frodo is getting there, a coilest cabinet mark 2 and the second mod of the matrix a squonker with stealth vapes new 510 squonker I have here looking at me
and as always
if you love my mods cabinets cases bags then like them...... come to vapefest on Saturday by a raffle ticket from the potv tent and maybe own one
a hoover was sacrificed 3 boards were used Alfie's tail was stepped on a sky box died......
ready?
really?
we shall begin..
upon this night we are watching "Signs" on the DVD (i watched the matrix films a dozen times already)
Graham Hess: Everybody in this family needs to just calm down and eat some fruit or something.
the above was very apt
so the matrix theme is black and green
the wood is Alder the colours are black x 3 green x 4 of which 2 were a pearl and a metallic
the resin spins with the rotation of the earth I'm not kidding here its spins the same direction as the water down a plug hole it does this as the catalyst heats up if we were in Australia it would go the other direction
this is the block pre sanded
lots of drilling the panel will be on the side the mod is rounded both sides like a flask style
those are 1.6mm screws for the top plate which is going to be copper
cutting down for the side switch which is going to be in copper also.
now problem originally this was going to be a DNA 250 so I ordered one and it arrived once fitted it said "warranty service" hmm I got onto evolv and they said you need 2 batteries it won't run on one, shit the mod is made I can't go back. in situations like this, my temper gets the better of me and the Hoover which I use in the workshop, I'm afraid bought it. yes, the hoovers today can't cut it against a brick wall they tend to smash into many pieces. I stomped into the house stepping on Alfie's tail by accident, to be told the sky box is buggered.....not a good day.
now @kamido is an understanding chap and said go with the dna75 which I ordered and fitted this board came from another supplier and turned out to be shagged knackered kaput shit again Alfie looked at me wearily the Hoover looked at me in disgust and the sky box is still buggered.
DNA board no 3 is perfect thank god and so we have the first mock up
notice the matrix code ... it needs a finish and a polish to become
oh the bits are dust on the mod I had an extractor going at the time of the pictures (Hoover bust remember)
but we need something to put the mod in something matrix themed
it has the same greens as in the mod
Neo a DNA 75 copper stabwood hybrid mod..........done
@kamido Neo is ready for you
I have some thanks here to give @jock1092 he's is a diamond @eshelby_dunn my good friend and confident @Greebo who I moan too endlessly and rob at stealth vape who once again got me out of the shit
next time we have maybe 3 things Frodo is getting there, a coilest cabinet mark 2 and the second mod of the matrix a squonker with stealth vapes new 510 squonker I have here looking at me
and as always
if you love my mods cabinets cases bags then like them...... come to vapefest on Saturday by a raffle ticket from the potv tent and maybe own one