stabwood panels from the workshop

[vapesmarter]

well this is a change of scenery

i have ventured into the world of billet for me they are an item that intrigues me so I asked for some panels and @TartanSpartan sent me some

dvd?

come on

hot fuzz

PC Danny Butterman: Did you take care of him?
Nicholas Angel: I threw him in the freezer.
PC Danny Butterman: Awwww... you shoulda said 'Cool off'.
Nicholas Angel: Well, you missed it earlier when I distracted him with the monkey and knocked him out and said 'Playtime's over'.
PC Danny Butterman: You're up the fuckin' CHAIN!

at the moment I'm not posting mods I'm still making but I thought I would share the panels as an ape sent them to me

so we have a cut one mine on the left and the original on the right

a bit of cutting going on here

edge cutting the lip

finished backs the wood is stabwood I haven't fitted the magnets as such but they will go with the panels the problem is I haven't got a billet and the magnets are pole specific

finished front with Paw on (but of course) I have done a button as well but didnt take a piccie

my good friend @joe clay is sending me some panels as a comparison to check the magnet and size so I know what's what this im grateful for thankyou mark

I already have an order for some, to set up will cost about £1500 for new machinery I'm torn to do this, I will use the kit but just of late I'm struggling with interest with mods and posting in general

love my billet etc......

 

[Chris K]

Alfie paw print!

These are just getting better and better Stu.

Lizzie will be keeping a close eye on your Instagram.

 

[MavicP]

Watching this with interest...

 

[MiscoDatt]

Watching with interest

 

[vapesmarter]

im watching too

 

[MiscoDatt]

Ha interestingly ninja’d

 

[rew]

Very nice Stu. Good luck with it

 

[Chris K]

Can I ask @vapesmarter...

When you say you've done a button... Is it an Alfie paw print button or a matching wood button?

(Please be a paw print button!!)

 

[Rob]

Gosh

 

[vapesmarter]

Can I ask @vapesmarter...

When you say you've done a button... Is it an Alfie paw print button or a matching wood button?

(Please be a paw print button!!)

I have messed about with the paw print the tolerances are tight, now you would have thought the billet is agricultural as in landrover but in fact, none of the measurements is in mm, that's not a problem as I work in imperial anyway but I when I gauged all the bits they are very accurate, I have plans of course for panels some 3d some resin some engraved, precious metals but it depends on the market and investment