Vapaneezer Scrooge
Vendor
- Joined
- Dec 23, 2017
- Messages
- 6,128
So my Zeta has been auto firing when you press the fire button, fires for a few seconds then crashes and reboots.
Fed up with it but thought I would try BYPASS mode, the problem has gone in this mode, about 8 hours use so far with not one auto fire.
To set it to BYPASS mode:
*****************************
ALTERNATE MTL RBA WATTAGE MODE WORKAROUND
@zouzounaki stumbled across this excellent solution, a few of us have tested it and it works:
Using thin gauge wire (28awg to 32awg) make your coil around 1.6 Ohms or higher eliminates the auto-fire/reboot issue so you can use it in Power / Wattage mode.
I am using this method and my faulty Zeta is now working perfectly.
Fed up with it but thought I would try BYPASS mode, the problem has gone in this mode, about 8 hours use so far with not one auto fire.
To set it to BYPASS mode:
- 3 x Fire Button
- 1 x Up button (will display BYP)
- 1 x Fire Button (to confirm)
*****************************
ALTERNATE MTL RBA WATTAGE MODE WORKAROUND
@zouzounaki stumbled across this excellent solution, a few of us have tested it and it works:
Using thin gauge wire (28awg to 32awg) make your coil around 1.6 Ohms or higher eliminates the auto-fire/reboot issue so you can use it in Power / Wattage mode.
I am using this method and my faulty Zeta is now working perfectly.
Last edited: