WISMEC Reuleaux RX 200S?

[holyjuice]

Not sure if I'm posting in the right place, sorry if I'm not.

Anyone own this mod? Mine is arriving tomorrow and I wanna know what anyone who owns it thinks of it.

I use rebuildable tanks exclusively, will be putting my Griffin 25 on it. As a rebuilder it's inevitable that at some point some juice will get over your mod, how well does the RX 200S handle that? My Sigelei 150w is an outstanding mod, it's had its fair share of juice spilled over it, been dropped and knocked and still performs as strong as ever. It's age is showing now though and I fancy something new, everyone seems to be raving about the Wismec mods so thought why not give a try.

Any input greatly appreciate.

Cheers.

 

[ianleeds]

Not sure if I'm posting in the right place, sorry if I'm not.

Anyone own this mod? Mine is arriving tomorrow and I wanna know what anyone who owns it thinks of it.

I use rebuildable tanks exclusively, will be putting my Griffin 25 on it. As a rebuilder it's inevitable that at some point some juice will get over your mod, how well does the RX 200S handle that? My Sigelei 150w is an outstanding mod, it's had its fair share of juice spilled over it, been dropped and knocked and still performs as strong as ever. It's age is showing now though and I fancy something new, everyone seems to be raving about the Wismec mods so thought why not give a try.

Any input greatly appreciate.

Cheers.

Personally, I would buy a silicon case for the mod. The finish is not so good and the paint falls off when you look at it !
The case will also help to prevent juice seeping into the venting slots.

 

[Breezy98]

Not sure if I'm posting in the right place, sorry if I'm not.

Anyone own this mod? Mine is arriving tomorrow and I wanna know what anyone who owns it thinks of it.

I use rebuildable tanks exclusively, will be putting my Griffin 25 on it. As a rebuilder it's inevitable that at some point some juice will get over your mod, how well does the RX 200S handle that? My Sigelei 150w is an outstanding mod, it's had its fair share of juice spilled over it, been dropped and knocked and still performs as strong as ever. It's age is showing now though and I fancy something new, everyone seems to be raving about the Wismec mods so thought why not give a try.

Any input greatly appreciate.

Cheers.

I have the RX200s

seen here on the right..
Its just like my black RX200 except it has a bigger screen..its a good mod

 

[mattyk2010]

IV got a 200s and it's been dropped 9 times and it's working fine, I use it with RDA's all the time so it's had its fair share of juice thrown over it and it's still working fine it's a true workhorse just as mentioned the paint finish is pants and it will start looking used real quick unless it's wrapped or put in a case

 

[mannikon]

I have and regularly use RX200 & RX200S (both full black) and RX200 DNA.
All good & reliable and no issues with gunking innards from juice.

 

[yappycat]

My main mod is a RX200s - had it about 3 months, paintwork still fine. Used it with +ohm tanks, -ohm tanks, RDAs. Never had any issues, gunk related or otherwise. Always works as it should - so I like it....a lot

 

[holyjuice]

Cheers guys! Came yesterday, first impressions are good, really good. A lot of people were complaining about a gap on the battery cover? With 3 18650's in there I don't seem to have any gap?

The air vents right below the tank is a little silly, but I'm just gonna be extra careful about any juice dripping down.

Again, cheers everyone that replied.

 

[yappycat]

Cheers guys! Came yesterday, first impressions are good, really good. A lot of people were complaining about a gap on the battery cover? With 3 18650's in there I don't seem to have any gap?

The air vents right below the tank is a little silly, but I'm just gonna be extra careful about any juice dripping down.

Again, cheers everyone that replied.

Just had to take a look at my mod to see what you meant about the air vents being too close to the tank...they're nowhere near man! You'd be getting juice over your hands and in the fire button before it got into those vents, you must be a sloppy bugger!
Have to say my battery cover appears to have a small gap...but it's like a hairline gap. It doesn't cause me too much concern coz at first I found the battery cover very difficult to remove, I find it easier now it's loosened up a bit - the cover doesn't feel as if its in danger of just falling off or anything tho, still fits snugly imo.
Glad you like it, and hope yours is as trouble free as mine has been

 

[holyjuice]

Just had to take a look at my mod to see what you meant about the air vents being too close to the tank...they're nowhere near man! You'd be getting juice over your hands and in the fire button before it got into those vents, you must be a sloppy bugger!
Have to say my battery cover appears to have a small gap...but it's like a hairline gap. It doesn't cause me too much concern coz at first I found the battery cover very difficult to remove, I find it easier now it's loosened up a bit - the cover doesn't feel as if its in danger of just falling off or anything tho, still fits snugly imo.
Glad you like it, and hope yours is as trouble free as mine has been

Haha well, sometimes when you're in a rush to rebuild a tank, anything can happen - a wick that isn't quite seated properly can end in a crap ton of juice pissing out of the air flows. Avoidable, yeah, but also possible.