it's a 0.24 ohm reading mate. I tried a new build with a bit more cotton as I had a few dry hits previously so thought I'd add more cotton, but it sounds like there's to much cotton? is it best cutting the wicks to the deck for length? I did try brushing the wick ends which I see most vapers do onlinePersonally it looks way too much, cotton almost looks strangled as it enters the coil. Thin the ends as well before pushing into the juice wells, to help with juice flow. What ohm is the coil as the Recurve is quite restrictive for very low ohm coils.
Hard to tell from the pics but to me your coil looks to low, if the air coming in is going over the top of your coil flavour will not be at its best, position of your coil has nothing to do with juicing, juicing is all to do with how well you install your cotton...Cheers will give that a go. I'm not sure if I've got the coil to low in the coil maybe. It's not touching the bottom or the sides but I thought putting it closer to the squonk hole would be better for juicing