Traian Nitu
Initiate
- Joined
- Apr 9, 2019
- Messages
- 13
I'll take pics tomorrow if I still fail on attempt #4..Can you post pics of your build?
I'll take pics tomorrow if I still fail on attempt #4..Can you post pics of your build?
juice in ya mush is serious flooding, also try the other glass
the bubble was wanked on 2 of mine but you "might" have a wanked straight std glass so consider trying the bubble or vice versa
one bubble was a bit oval-ish & another had a slight chip in it
when I assembled these I knew almost straight away was fucked coz these True's don't flood unless something is fucked like glass/seal
These tanks don't really flood or gurgle, they might leak until you suss it but they don't really flood unless something is way out of whack
(well so I found, but I might have just sussed the wicking bollocks on them)
The coil should sit about 2mm above the jet/hole - other tanks you can sit the coil really low but not too low on the True's
no fancy coils - just some kanthal 6 or 7 wraps maybe producing 1.2 Ohms give or take a bit maybe about 11w give or take a watt perahps
or until you get the flavour - shouldn't need mega watts on this tank, really shouldn't need it - but you'll suss what coil/watts works
(you're not a noob)
think raise the coil a smidge and check the glass/seals if she floods/gurgles, coz that is a sign of a bad seal on that True tank especially
I didn't pay too much attention to the glass but I had no leaks except the holes. I'll inspect it more closely tomorrow morning (I am on the EET timezone). Also, I will try my own coil, until now I used the premade one that came in the package. And I set it under the clamp, I will try it around the screws this time, it will be 1mm higher by default.
Many thanks for your answers and excuse my English.
The only thing those clamps are good for is pissing you off when you wash the deck and they turn round [emoji23]I find the screws easy to trap the wire. Never bothered with the clamps
Alright, I'm back. I think the problem is gone now. I have used my own clasic kanthal coil and trap it under the screws. Damn the clamps!
Many thanks for the swift and helpful replies!
(I'll test the bubble glass later, i'm not curious for now, I like the slick look of the tank on top of the ehpro 101 mod)
OK, one hour later, I got the same problem. I'll now focus on the glass and the o rings.