Dna200 help and coil info need. Please

[Malc16]

Evening everyone [emoji41]

Please go easy on me as an just new to a dna200 [emoji15]

I have been using a rdna40 for ages but was starting to struggle with only 40w for some of my builds. After some looking about I decided to buy a lava box thinking this will cover all my needs for all styles of Vaping. I have many different tanks rda etc

I do think this is a but advanced for me but trying to learn it the best I can.

After playing around with it in kanthal and then having a play with my own builds of NI200 and escribe am needing some help and advice


When I plug in do I need to loads a csv file for NI200 wire or do I just play around with my settings of my profile as ni200 is already an option. As well as custom



Is it just when I use something like stainless or titanium that I need to use steam engine to put my data in to get the csv file for my wire to load onto another profile ?

I have spent ages looking online to see if there's any info or forums that will list a csv file for stock coils as I have a few tanks like the crown that I believe is stainless 0.25 ohm.

A list of common stock coils with wire type. Size etc would be great so it can be entered into steam engine to get the csv download file.

Thanks in advance if anyone can help me out.

 

[Tubbyengineer]

Evening everyone [emoji41]

Please go easy on me as an just new to a dna200 [emoji15]

I have been using a rdna40 for ages but was starting to struggle with only 40w for some of my builds. After some looking about I decided to buy a lava box thinking this will cover all my needs for all styles of Vaping. I have many different tanks rda etc

I do think this is a but advanced for me but trying to learn it the best I can.

After playing around with it in kanthal and then having a play with my own builds of NI200 and escribe am needing some help and advice


When I plug in do I need to loads a csv file for NI200 wire or do I just play around with my settings of my profile as ni200 is already an option. As well as custom



Is it just when I use something like stainless or titanium that I need to use steam engine to put my data in to get the csv file for my wire to load onto another profile ?

I have spent ages looking online to see if there's any info or forums that will list a csv file for stock coils as I have a few tanks like the crown that I believe is stainless 0.25 ohm.

A list of common stock coils with wire type. Size etc would be great so it can be entered into steam engine to get the csv download file.

Thanks in advance if anyone can help me out.

NI200 is the default temp control wire, if you want to use any other type of wire you'll need to load a CSV file from Steam engine or the wires manufacturer. For stock coils the material type is usually in the coils specs, although you might have to email the manufacturer to get the wires details...

You don't need to worry about the wires size just it's composition and the csv file....

 

[Malc16]

NI200 is the default temp control wire, if you want to use any other type of wire you'll need to load a CSV file from Steam engine or the wires manufacturer. For stock coils the material type is usually in the coils specs, although you might have to email the manufacturer to get the wires details...

You don't need to worry about the wires size just it's composition and the csv file....

Thanks for the reply. I have played about with setting for ni200 and still can't see to get a good Vape.

I have a steam crave dual build 36awg ni200 @ 0.06ohms. Could you have a look at my pics and maybe help show me what's wrong ? It's Jumping up and down trying to keep my 443 degrees temp. I have checked atomiser analyser and my build is a solid ohm reading.

 

[mdhardy01]

At .06 your hitting temp almost immediately ni200 isn't easy for dual coils as you need to be at about .15ohm
Try upping your temp to 500f

 

[Malc16]

At .06 your hitting temp almost immediately ni200 isn't easy for dual coils as you need to be at about .15ohm
Try upping your temp to 500f

Tried up at 500 but it feels quite savage hard Vape. Didn't get up to 500f when left at 60 watts

 

[mdhardy01]

Ok so it's maxing out at 464f so set to 460f then the temp control will hold it there
When you say harsh in what way ? What mg nic?
I would run 3 or 6 in my aromamizer no higher

 

[Malc16]

Ok so it's maxing out at 464f so set to 460f then the temp control will hold it there
When you say harsh in what way ? What mg nic?
I would run 3 or 6 in my aromamizer no higher

Ok thanks I'll give it a try. Just like fired quick and the draw on its only for a like a second Vape. Am Vaping 6mg at the moment

 

[Malc16]

Ok so it's maxing out at 464f so set to 460f then the temp control will hold it there
When you say harsh in what way ? What mg nic?
I would run 3 or 6 in my aromamizer no higher

 

[mdhardy01]

View attachment 68175

Also in your first pic you've got pre heat set to 100w try lowering to 70-80 for .6-.7 seconds

 

[Tubbyengineer]

That kind of result is also often due to having too much wick, try it again with a bit less wick and lower temperatures...