Dna200 help and coil info need. Please

[Tubbyengineer]

Sorry I just noticed your reply as my phone doesn't always notify me. I'll give that a try thank. Only thing am not sure about is the battery settings and watt hour calculator.
Thanks

It's simple, just enter the Voltage, and mah capacity and it will tell you the correct setting...

 

[Malc16]

It's simple, just enter the Voltage, and mah capacity and it will tell you the correct setting...

Just selected the new. Now my battery is still the same as before. I don't know the meh etc of the battery. Is this printed on the battery in the lava box ?

When I say (no) to the picture asking if I know the meh of the battery it then shows me the calculator with the fields steady filled in. Will these be the settings of my battery. Or they just examples.

Am really sorry for seeming daft with all this. Really appreciate your help tho [emoji106]

 

[Malc16]

It's simple, just enter the Voltage, and mah capacity and it will tell you the correct setting...

Sorry forgot to ask. Should I still lock my ohms on my mod at room temp before Vaping ?

 

[Tubbyengineer]

Just selected the new. Now my battery is still the same as before. I don't know the meh etc of the battery. Is this printed on the battery in the lava box ?

View attachment 68473View attachment 68474View attachment 68475View attachment 68476

When I say (no) to the picture asking if I know the meh of the battery it then shows me the calculator with the fields steady filled in. Will these be the settings of my battery. Or they just examples.

Am really sorry for seeming daft with all this. Really appreciate your help tho [emoji106]

Battery voltage is 11.1v, mah is 900

 

[Tubbyengineer]

Sorry forgot to ask. Should I still lock my ohms on my mod at room temp before Vaping ?

No need to lock the ohms unless you're getting readings that bounce around a lot...

 

[Malc16]

Battery voltage is 11.1v, mah is 900

Thanks. My readings are usually good. Just thought will all temp mods that ohms had to be locked


So looking at my battery do I need to change anything or is my battery ok at the settings it's at ?

Thanks

 

[Tubbyengineer]

Set it to 9.99 wh, you should find you get a little more battery life...

 

[rune]

^^^^^^^^ this
Your ohms are still too low
0.1+
0.05 is far too low on a dna200

I've done a a couple of 0.04 dual coil Ni200 builds, one in my Velocity and another in my Cthulhu v2 and I've had no issues with either. Some of the best vaping experience that I've had with TC.

 

[subvaperjim]

It sounds like your pretty sorted now but just in case your not here is how I suss out new builds that don't vape well using the escribe csv maker.
I put all the settings into escribe as normal and upload the file to my mod.
Leave the mid hooked up to escribe and make sure your happy with preheat settings.
Go to the graph section on the selected peofile and tweak the first 3 settings but only by very small amounts remembering the curve always has to increase
If after the first tweak it's to harsh or to weak tweak it a little the other way, remember to upload your settings after every adjustment
It can be very time consuming but once you get it right it's well worth the effort
Remember to save the file as well as upload it to your DNA
The photo shows a dual ni200 Clapton .4 inner .20 outer it took about 20 minutes of tiny adjustments but once I got it right it was fantastic

 

[Malc16]

It sounds like your pretty sorted now but just in case your not here is how I suss out new builds that don't vape well using the escribe csv maker.
I put all the settings into escribe as normal and upload the file to my mod.
Leave the mid hooked up to escribe and make sure your happy with preheat settings.
Go to the graph section on the selected peofile and tweak the first 3 settings but only by very small amounts remembering the curve always has to increase
If after the first tweak it's to harsh or to weak tweak it a little the other way, remember to upload your settings after every adjustment
It can be very time consuming but once you get it right it's well worth the effort
Remember to save the file as well as upload it to your DNA
The photo shows a dual ni200 Clapton .4 inner .20 outer it took about 20 minutes of tiny adjustments but once I got it right it was fantasticView attachment 69520

Hi. Thanks for the reply. Am defo not there yet but getting there slowly. Had some great info and pointers in the right direction on here. After you have made your tweeks do you actually Vape it or use the escribe diagnostic graphs to see what's happening ?

That's looks a great build. What ohms does that come out to ?

Thanks again [emoji106]