Dna200 help and coil info need. Please

[Malc16]

Ni200 is built in to the mod so it already has the TCR graph so a cvs for it would be pointless. I tried the SS 317L in my Aromarizer RDTA and was pretty disappointed. Seems better to use like Kanthal rather than TC.

Edit: And check Escribe - Mod tab for the battery settings. My Lavabox was set to 8 watt hours and a 3.66v soft cell cutoff and the battery life was abysmal. Changed it to 9.9 watt hours and 3.09v for the cutoff and get twice as long now.

Just noticed you mentioned battery. This is what mine is set to. Is this correct ?

 

[rune]

Just noticed you mentioned battery. This is what mine is set to. Is this correct ?View attachment 68337

The Cell Soft Cutoff is fine, I would change the capacity to 9.9 watt hours though.

 

[Malc16]

The Cell Soft Cutoff is fine, I would change the capacity to 9.9 watt hours though.

It's the pest again lol. Wondering if you could advice on this. I've messed about with it most of the day. I've managed to get this running well (please see pic). But it's to hot and powerful for me. I've messed about with all adjustments power. Temp. Pre heat etc and as soon as I change something my temp jumps all over the place. Like +/- 20 deg. Any ideas how to reduce this but keep a nice constant temp ?
Thanks

 

[diva]

0.04ohm ?? Damn !

 

[mdhardy01]

^^^^^^^^ this
Your ohms are still too low
0.1+
0.05 is far too low on a dna200

 

[diva]

My dna200 I run my coils at 0.15 minimum.

Do yourself a favour and recoil it to a higher ohm and re run your tests

 

[Tubbyengineer]

It's the pest again lol. Wondering if you could advice on this. I've messed about with it most of the day. I've managed to get this running well (please see pic). But it's to hot and powerful for me. I've messed about with all adjustments power. Temp. Pre heat etc and as soon as I change something my temp jumps all over the place. Like +/- 20 deg. Any ideas how to reduce this but keep a nice constant temp ?
Thanks

View attachment 68397

Adjusting the temperature shouldn't make any difference to the way it fires.

 

[Malc16]

^^^^^^^^ this
Your ohms are still too low
0.1+
0.05 is far too low on a dna200

Sorry. I should have said. Am even getting this with 0.15 crown stock no coils. Think I've made a million coils trying stuff today. That build is already in the bucket lol. [emoji23]

 

[Tubbyengineer]

Right, I think you need to clear the decks on this one, Plug in your mod, make a note of the battery settings and then select NEW file to reset everything in the profiles to default and then, re-enter your battery settings (or enter them using the Watt Hour calculator) then upload to your device.
Now create a profile for the Crown using 50w pre heat, No Ohms lock, 40w power, 390f. These are settings that have worked for me on similar tanks, if the dont work for you then you need to investigate the tanks or connections...

 

[Malc16]

Right, I think you need to clear the decks on this one, Plug in your mod, make a note of the battery settings and then select NEW file to reset everything in the profiles to default and then, re-enter your battery settings (or enter them using the Watt Hour calculator) then upload to your device.
Now create a profile for the Crown using 50w pre heat, No Ohms lock, 40w power, 390f. These are settings that have worked for me on similar tanks, if the dont work for you then you need to investigate the tanks or connections...

Sorry I just noticed your reply as my phone doesn't always notify me. I'll give that a try thank. Only thing am not sure about is the battery settings and watt hour calculator.
Thanks