RBA vs pre-built - Please explain

[vapervince]

I found some 25 awg on crazy wire

 

[andyroo]

Up to you mate but I think Stealthvape wire is as good as it gets and worth every penny.
I use their 25g flat kanthal in everything 5ish wraps 2.5 id 0.5ohm.
It’s a while since I’ve used Crazy Wire it took ages to come.
Your call.

 

[vapervince]

If I knew that it would do I wouldn`t hesitate, but all on 20 quid for a tester is a bit ott

 

[andyroo]

If I knew that it would do I wouldn`t hesitate, but all on 20 quid for a tester is a bit ott

I can send you a foot of 25g flat kanthal to try if it’s any good to you, PM me if you’re interested [emoji106]

 

[Frogprince]

Evolution have some going cheap
https://www.evolutionvaping.co.uk/flatwire-uk.html

 

[vapervince]

I can send you a foot of 25g flat kanthal to try if it’s any good to you, PM me if you’re interested [emoji106]

Thanks for the offer but I`ve ordered some.

 

[Reti]

Dudes I'm ready to order a Steam Crave Aromamizer Supreme V3 RDTA. I'm going to go for fused Clapton's at first and see how I get on. What size and guage coils should I get? I'm going to get pre made ones at first before making my own.
Also, what cotton do I need? Do they come in different sizes?
Remember it has decks for dual coil, single coil and mesh so do I need different cotton sizes for all?

 

[30deadcats]

You'll get some coils and mesh strips with the attie. Can't remember if they give you cotton or not. But as for cotton...... you're opening up a can of worms. We all have our favourites so you'll get about 20 different opinions. I myself find that muji is adaptable for any coil or mesh so maybe start with a bag of muji (that'll last you about 2 years) then if you want to experiment then try something like cotton gods or cotton bacon or fuzz or canna or etc etc. All down to personal preference. Some people even use a mop head. Someone on here uses cheesy socks.

 

[Gitchy]

Dudes I'm ready to order a Steam Crave Aromamizer Supreme V3 RDTA. I'm going to go for fused Clapton's at first and see how I get on. What size and guage coils should I get? I'm going to get pre made ones at first before making my own.
Also, what cotton do I need? Do they come in different sizes?
Remember it has decks for dual coil, single coil and mesh so do I need different cotton sizes for all?

Fused clapton's are decent in the Aromanizers. I'd recommend some flatwire flapton wire though, I find it gives better flavour and if you want fast ramp up the Ni80 one is good. It is expensive compared to other wires mind you.

You'll perhaps need some mesh strips as well if you like the mesh. Pretty sure it'll come with some though but there are better ones than the steamcrave strips around. I go for the OFRF ones myself.

Cotton wise, you'll need some 6mm laces for the mesh. I use the firebolt mesh ones but there are others and some folk like to use a couple of 3mm laces in their mesh builds. For the single of dual coils there is a lot of choice of cotton. I like cotton gods, dat white stuff or shake and vape cotton but again there are cheaper alternatives.

It's all about experimenting really mate, and finding what suits you best. These above are just my preferences.

 

[Reti]

Fused clapton's are decent in the Aromanizers. I'd recommend some flatwire flapton wire though, I find it gives better flavour and if you want fast ramp up the Ni80 one is good. It is expensive compared to other wires mind you.

You'll perhaps need some mesh strips as well if you like the mesh. Pretty sure it'll come with some though but there are better ones than the steamcrave strips around. I go for the OFRF ones myself.

Cotton wise, you'll need some 6mm laces for the mesh. I use the firebolt mesh ones but there are others and some folk like to use a couple of 3mm laces in their mesh builds. For the single of dual coils there is a lot of choice of cotton. I like cotton gods, dat white stuff or shake and vape cotton but again there are cheaper alternatives.

It's all about experimenting really mate, and finding what suits you best. These above are just my preferences.

Thank you mate. What about size for the normal coils? So I'll get 6mm for mesh. Is it 3mm for the other coils?
What size coils also? What gauge?