Tank Dripping/Almost Automated Dripping

[wazalac18]

i never like dripping since im not fond of dripping from time to time, thats why i was hooked on tanks, used with it were kanthal or fettuccine wire on silica, cotton and ss mesh.
then i come to stumble with this video!!
it come to my senses that i'd like to give this a try since i didn't like the idea of having 2 opposite airflow holes, and use this technique with a tank so dripping won't stop till the tank is empty.
here what i've done.


this needs:

wire cutter
long nose pliers
scissors
kanthal wire
2mm stainless/rod
silica wick
a piece of thread
and refer to the video above credits to him (since a have no one to video this work)

Uploaded with ImageShack.com



make 9 loops with the use of kanthal on the rod with kanthal's one end on a long nose
Uploaded with ImageShack.com


bend it on the middle to make 2 conjoined coils with 4 loops opposite of the ends
Uploaded with ImageShack.com


Cut silica wick
Uploaded with ImageShack.com



insert it into the coils
Uploaded with ImageShack.com



mount and check
Uploaded with ImageShack.com



tilt it to get the wicks wet,
look

it seems long on the first time, but when its already wet, it'll always be wet everytime you tilt as you vape untill you juiced it all up.

almost automated huh?