Subohmoctopus
Postman
- Joined
- Sep 2, 2018
- Messages
- 401
I currently have 26ga kanthal and NI80 26ga cores 26ga wrap fused clapton wire. My RDA is quite small diameter and I can only fit about 9 wraps on dual coil builds the highest resultant ohms being a 0.34 build.
This 0.34ohm build will really push the limits of my stacked tube series mechanical mod (8.4 potential volts) which will be arriving soon and i dont want to continuously overstress my batteries, this build would draw 26amps from my 30 amp batteries resulting in 200watts produced.
Preferably i would like a wire that can give me the most surface area and work on a dual coil build resulting in around 0.6 or 0.7ohms with 9 x 4mm diameter wraps (on a dual coil build)
I also have a random question to add to all of this, what is the difference between NI80 and NI60 Nichrome wire?
Should i just go with a high gauge nichrome wire?
Thankyou
This 0.34ohm build will really push the limits of my stacked tube series mechanical mod (8.4 potential volts) which will be arriving soon and i dont want to continuously overstress my batteries, this build would draw 26amps from my 30 amp batteries resulting in 200watts produced.
Preferably i would like a wire that can give me the most surface area and work on a dual coil build resulting in around 0.6 or 0.7ohms with 9 x 4mm diameter wraps (on a dual coil build)
I also have a random question to add to all of this, what is the difference between NI80 and NI60 Nichrome wire?
Should i just go with a high gauge nichrome wire?
Thankyou