Digital_Packrat
New Member
- Joined
- Jan 25, 2023
- Messages
- 1
Hello.
So I have a aegis s100 solo 2, Had it about 2 months and the last week or two I'm having an issue were the mod keeps asking new or old coil, I looked closer at this and it is reading different resistances every time it asks me that.
I have also noticed that just leaving it alone on my desk the screen lights up as it would if I had just used it or put the tank back on, When I pick it up to use it, It asks new or old coil.
Even after I have just had a successful puff and go for another it will ask again, It is so hit or miss.
At times it will work for hours just fine and other times I will fight with it and have to click new or old up to 7 times before I get a puff.
My girlfriend has the exact same mod as me so I switced tanks and mine works perfectly fine in her mod and hers works perfectly fine in mine so I can't narrow down the problem.
I even made sure the same batterys were in both for the test.
The only difference between the two is the tanks.
We both use a freemax fireluke 3, Same coil and resistance, I use a 5ml and she uses a 3ml tank I think, 2 or 3ml.
I have tried cleaning the plate on the mod and the bottom of the tank as I realized I have never done that before but I also never did that with any of my other mods and never had this issue, In fact my last mod was the previous version of my current mod, Only different is my old one didn't have the side lock.
I used the same tank in that and never cleaned the connector for the year I had it.
And had zero problems.
I know the mod and the tank work but for some reason they don't work properly together.
Thank you for any advice you can give me and I apologize if I posted this in the wrong section I'm new to the forum, Hello.
Edit:
I forgot to add that sometimes when I click new coil the display reads no atomizer, Only when I click new and not every time.
So I have a aegis s100 solo 2, Had it about 2 months and the last week or two I'm having an issue were the mod keeps asking new or old coil, I looked closer at this and it is reading different resistances every time it asks me that.
I have also noticed that just leaving it alone on my desk the screen lights up as it would if I had just used it or put the tank back on, When I pick it up to use it, It asks new or old coil.
Even after I have just had a successful puff and go for another it will ask again, It is so hit or miss.
At times it will work for hours just fine and other times I will fight with it and have to click new or old up to 7 times before I get a puff.
My girlfriend has the exact same mod as me so I switced tanks and mine works perfectly fine in her mod and hers works perfectly fine in mine so I can't narrow down the problem.
I even made sure the same batterys were in both for the test.
The only difference between the two is the tanks.
We both use a freemax fireluke 3, Same coil and resistance, I use a 5ml and she uses a 3ml tank I think, 2 or 3ml.
I have tried cleaning the plate on the mod and the bottom of the tank as I realized I have never done that before but I also never did that with any of my other mods and never had this issue, In fact my last mod was the previous version of my current mod, Only different is my old one didn't have the side lock.
I used the same tank in that and never cleaned the connector for the year I had it.
And had zero problems.
I know the mod and the tank work but for some reason they don't work properly together.
Thank you for any advice you can give me and I apologize if I posted this in the wrong section I'm new to the forum, Hello.
Edit:
I forgot to add that sometimes when I click new coil the display reads no atomizer, Only when I click new and not every time.