Aga T2 - Poor vaping

[Vapingmonkey]

I ordered some .20 kanthal for my protanks and they sent me some .9 ribbon for free. Might give that stuff a go on my T2 now. I got some ekowool but it frays like a bitch

 

[Reevo]

Flame the section you are going to cut and use nail clippers instead of scissors, should help wi the fraying.

 

[Vapingmonkey]

Thanks reevo will try that

 

[jimsie33]

I ordered some .20 kanthal for my protanks and they sent me some .9 ribbon for free. Might give that stuff a go on my T2 now. I got some ekowool but it frays like a bitch

Yeah it does doesn't it

Flame the section you are going to cut and use nail clippers instead of scissors, should help wi the fraying.

Handy to know, will try it next time I re wick I usually flame it then use scissors or side cutters.


Sent from my Ascend G300 using Planet of the Vapes mobile app

 

[jimsie33]

Have just rewicked with a s/s wick and microcoil. No hotspots and vapes pretty well

Sent from my Ascend G300 using Planet of the Vapes mobile app

 

[Vapingmonkey]

FINALLY!!!!!!! So . . . . .. .
.20 kanthal at 6 wraps 2.9 ohms
SS mesh wick with a cotton ball top where the coil is.
Vapes cool loads of flavour and similar to my protanks but with an airier draw but I think thats down to the space in the t2 head.

Chucks the vapour and really smooth. Not an aga t2 convert just yet but at least its working Wahoooo thanks for all your help guys

Btw just ordered a kamry x10 to play with. Any tips lol

 

[Vapingmonkey]

This is going to sound a little strange, but I thought i'd try an experiment . . . . . .

so everyone raves about a bigger air hole on the T2, I thought i'd try the logic out and through lack of a bigger air hole, and lack of equipment to drill one i did something very strange

I vaped through the air hole which drew in air from the mouthpiece (a bigger hole lol)

Looked totally ridiculous buuuuuuuuut immediately more flavour, more vapor, more throat hit . . . .. got a bit hot as I was so close to the coil lol

but the logic is sound . . . . .. I think. . . . . don't believe me try it

and no . . . . I shant be vaping the T2 like a flute in future, instead I shall endeavour to (excuse the phrase) lube up and drill myself a bigger hole

Let me know if you try it, just a bit of fun

 

[Vapingmonkey]

The AGA Saga continues . . . . . . .

So I've finally mastered the wicking and coiling on the aga and it is decent, not highly decent but decent

Now I have a threading problem. it will not thread on the Vamo, what once was quite a nice fit is not entirely loose, as though it is too small for the Vamo head

any ideas?? anyone experience the same thing? would an ego 510 adapter fix it?

should br called the arrrrggggghhh grrrrrrrrrr T2 (so frustrating)