Rudi
Postman
- Joined
- Feb 14, 2018
- Messages
- 165
So finally I got my NiFe30 wire and starting the journey. So far a little disappointed but something normal for the first 2 hours IMO.
I am using the Boxer mod with a Dead Rabbit 24mm. After 2 failed attempts I managed to make 2 coils , 5 wraps , 3mm ID from 28g wire and I have 0.126ohm. I loaded Stealthvape profile and changed the temp to 247 C and 100W. I am getting a nice warm vape but flavour is low and also I have a strange taste compared with the taste from brochrome. Not sure if this is just because a different wire or is something wrong with my settings. Should I go higher/lower on temp/watts? Should I build at higher ohms?
The best build for me by now is Brochrome dual coil ,3mmID , at 0.31ohms and 47W.
I am using the Boxer mod with a Dead Rabbit 24mm. After 2 failed attempts I managed to make 2 coils , 5 wraps , 3mm ID from 28g wire and I have 0.126ohm. I loaded Stealthvape profile and changed the temp to 247 C and 100W. I am getting a nice warm vape but flavour is low and also I have a strange taste compared with the taste from brochrome. Not sure if this is just because a different wire or is something wrong with my settings. Should I go higher/lower on temp/watts? Should I build at higher ohms?
The best build for me by now is Brochrome dual coil ,3mmID , at 0.31ohms and 47W.