6mm diameter post should do
should give 27mmsq or thereabouts
would have to be hybrid
How the feck does it wick fast enough ?? @Raguri
Currently at 0.08 on the double cross, using loose cotton. Short hits with a break.
From soaking wet and pooled to dry, looks like this:
http://instagram.com/p/nWJmscFxgK/
I must admit, voltage drop means that I'm not getting a full 4.2v, haven't, measure the exact voltage to the coils as I value my hands (still have the brand marks from where I slipped with the multi meter last time!)
you may get away with 5mm dia post solid silver without much volt drop.
At 100 amp every tiny resistance level means you are wasting energy in the mod.
A pure mech. mod may be best at that level.....
Just thinking of soldered connectionsOnly problem with mech mods is the batteries...
A lipo box using a mosfet switching circuit, using 12awg silicone turnigy wire shouldn't be that bad on voltage drop really. The battery itself is very well rated for high amp situations with voltage retention. Looking at using gold plated connectors to try and reduce the drop through them as well.
Oh and did I point out that E-liquid can be flammable under the right conditions, a lungful of flames is a no fun way to die...