Genny style atty woes

[RicModMaker]

Seedy the other thing with genesis atties is the 'genny tilt', you need to tilt the atty every so often to the wicking material and I also ensure I lift and tilt as I vape... you probably already do this but it is a consideration not already mentioned

Thanks. Yeah. I already do that.

 

[RicModMaker]

SS rope with ekowool sleeve on top half of ss rope, then rap coil around ekowool sleeve. ive got the rsst and agat2 both set up with this and work a treat. gimme a shout if you get stuck.

Thanks for the help. Ive got 400 mesh. Do you think 200 or 300 would wick better? I'm thinking of making a tube with a tiny bit of silica to stop it pouring out. Any thoughts?

 

[Reevo]

Thanks for the help. Ive got 400 mesh. Do you think 200 or 300 would wick better? I'm thinking of making a tube with a tiny bit of silica to stop it pouring out. Any thoughts?

May do if you juices are thick? Have you got ss rope n ekowool?

 

[RicModMaker]

May do if you juices are thick? Have you got ss rope n ekowool?

Not as yet. Id like to try any get it working with the SS mesh Ive got. Will the rope be any different?

 

[jeffhds]

Yep, sounds like it, i'd say try the rope, should keep the coil juiced

 

[VaperCaper]

Thanks for the help. Ive got 400 mesh. Do you think 200 or 300 would wick better? I'm thinking of making a tube with a tiny bit of silica to stop it pouring out. Any thoughts?

300 is better for thicker e-liquids 500 mesh is better than 400 mesh for wicking normal liquids.

A double wick (as in one of the vids above) or putting silica inside it will both help wicking.

Getting the wick right on a Genesis build is at least as tricky as getting the coiling right imo.

 

[Reevo]

personally I found ss rope wicks better. Try the ss mesh, don't wrap the coils to tight tho. Could try a microcoil using the drill bit method?

 

[Reevo]

Seedy let me know how you get on, if you want to try ss rope, let me know, pm me your address n il post some out.

 

[Chegs]

Would increasing the air not help? I ask as my little 17 mm aga-s is using a 2 ml tank in under 2 hours since I added a 2 nd airhole. The flavour is awesome,really strong warm and wet. Way better than adding a second wick/coil.

Sent by lazer from just north of the world's largest nuclear dustbin

 

[RicModMaker]

I've been thinking that might help. I might try drilling the hole a bit bigger. I've currenty got it at 1.5mm but I like the draw of my Igo-L at 2mm.
Anyone think this will help?
Surely it won't help the wick get juiced more.
Would it keep the coil cooler so no more burnt hits?
Questions, questions, questions
I appreciate all the help.