Cyman404
Postman
- Joined
- May 4, 2021
- Messages
- 204
Firstly, appologies for any spelling mistakes or 'weird' grammar. English is not my native language...
Warning: Some of the language used might be inappropriate for younger generation.
Here we go..
Ordered Geek Vape Boost Plus and Damn Vape Doom Mesh-RTA as well as a couple of Sony 18650 batts and an Intellichatger i4 as a 'natural progression' to my aging kit (anybody remembers 650mah Egos or iStick mini?)..yes, that was the extend of my vape kit.
Everything arrived within a week of ordering. Happy times.
To cut the long story short (so as not to bore some of the readers and not to get on the bad side of the moderators for being longwinded), everything got unpacked, batts charged and I'm giddy with enthusiasm to try that 'magic mesh' thingy everybody is talking about.
Just to be 'well educated' I've watched a number of YouTube vids about Doom Mesh-RTA.
Hmmm...First things first..it's a heavy beast. I thought to myself, a nice sturdy RTA made from proper stainless steel (and not the Chinese stainless steel aka silver plated brass), everything fits smoothly together and in case of emergency I could always use it as a deadly weapon, another plus is that by lifting it my lips a couple of hundred times a day I could finally have biceps like Conan the Barbarian.
It was simple to change the hated TPD 2ml tank to a larger 3.5ml tank with the help of screwing in an extender. Now I felt really good. On Geek Vape Boost Plus it looks 'cool', I thought to myself, no more snickering behind my back when I walk down the street. Yeah...I'm the Man!
The next challenge was to fit the mesh, thread in cotton, prime it, put it all together, fill the tank and blisfully start vaping. What could go wrong? This is so easy...I'm the Man!...I can do it!
Fitted the mesh, fired it at low watts to get rid of the oil/dirt and to get a nice even glow. So far so good.
Thread the cotton, OK, on the 'Planet of the Vapes' in one of the threads they did say use as much cotton as you can and then add some more, fine, I'll do just that, got a nice thick bundle of cotton, sqeezed one end and started threading it through...WTF...no matter how much I squeezed, no matter how hard I pushed the bloody thing woudn't go through! This is ridiculous I thought, after all...I'm the Man!...loosing my viriginity was easier then this! It's like trying to thread a needle with a tree branch!
The mesh lost it's shape, the cotton got twisted and oily from my sweating hand/fingers and I'm starting to swear. No good.
Right, let me think, ahhh, they did mention there is a spring loaded 'lever' below the mesh that helps to press cotton against the mesh, Ok, so, just press on it as you thread the cotton through and it's done, easy. Ermmm, no efing way! After 'reshaping' the mesh, I've started again. It's the same story as before. I beginning to think that this thing hates me!
F**k this, I unscrew the mesh, place the thick lace of cotton across as shown in vids and screw the mesh in place. I win!
Primed the cotton with my favourite juice, nice and soggy, just as it should be. Using 510 adaptor I put it on Boost Plus and fire to check on my build.......NO ATTOMISER! error message appears...what? WHAT?! WTF now! At this stage I'm slowly beginning to get annoyed, took a few deep breaths and started to look for a short. Found it. Some of the cotton blocked the proper connection when I was fitting the mesh over it. Corrected this. Fired the button again. YES. It seems to be working. All good.
Fitted the tank on my build, filled the tank with the ejuice, set the Watts to 38, got my lips on the drip tip, fired the button and inhaled deeply....S**t!!! F*&k!!! My lungs are on fire!!! I caugh, I splutter and I swear, my wife later said that 'steam' was coming out of my ears (I still think she exaggerated). I rush to the kitchen for a drink of water to put out that lava in my lungs and wiping out the tears I sit down and I'm ready to chuck the bloody thing through the window...but no, I'm the Man!...I can do it!
Took the whole thing apart, looked at my build, yeah, cotton wasn't really making contact with the mesh. Added more cotton, then some more. Primed it again. Put everything back together, lowered the wattage to 15, filled the tank with just about 1ml of juice (just in case so as not to waste any more of it) and took a tentative inhale. YES, bingo, I got there in the end.
Increased the Wattage to 25, inhaled deeply and got a thick plum of cloud. Nice, now I can walk down the street and pretend to be a steam powered train!, especially as every time I inhale the bloody thing is 'whistling', never mind that I feel like I'm inhaling fresh air...this RTA is REALLY airy!
OK, now that it works, it's time to fill up the tank. It's top fill. Good.
Unscrewed the top and filled it to the brim...like a new born, it pissed itself from the bottom air holes. F********k! another 2ml lost! Living in Yorkshire, I'm tight with my money, don't like to waste even a sigle ml, and this thing is now responsible for the loss of at least 3ml! By now my desk is cluttered with all the wet tissues from wiping and cleaning away all that juice. It looks like an aftermath of a teen after watching his first porn movie.
Not deterred I tried again, closed the air holes, closed the juice flow inlet (yes, this RTA does have that option), wrapped a fresh tissue round the bottom half (just in case of another mess), filled it up again. Slowly opened juice flow control, just, just, so that only a trickle of juice would be wetting the wool, opened only one out of the three (huge) airholes, waited, took a deep breath, wiped away some more 'little mess' that still came out of the air hole, wrote my last will & testament, asked God, wife & kids for forgivness and went for it.
Ahhhh....nice....lovely vape...I did it, I'm the Man!, no stopping me now!
Ten minutes later, wife walks into the room and asks me what did I set on fire as there is so much fog in the room it's hard to even see the opposite wall. Once established that the house is not on fire she mutters 'It's the shed for you and that thing'. Oh well, looks like I'm in the bad books again (I will never understand women, I don't complain when she burns the toast!).
To finish off, and just to summerise....
I really like the build, simplicity and the ease of setting up the mesh in this RTA. It's a solid performer.
But...there are minuses as well. It's airy as hell, with one hole open it whistles, it tends to pee itself no matter what you do when you refill, and finally my biggest dissapointment is the lack of flavour, although to be honest the flavour gets a little better the more you vape, maybe the mesh needs a bit of 'bedding in'...dunno...also, vaping on 0.18Ohm mesh with high Watts is hard on battery life.
Did I enjoy the experience? Yes I did. I'm going to experiment a bit more with this RTA, build some coils and try these as well...
Warning: Some of the language used might be inappropriate for younger generation.
Here we go..
Ordered Geek Vape Boost Plus and Damn Vape Doom Mesh-RTA as well as a couple of Sony 18650 batts and an Intellichatger i4 as a 'natural progression' to my aging kit (anybody remembers 650mah Egos or iStick mini?)..yes, that was the extend of my vape kit.
Everything arrived within a week of ordering. Happy times.
To cut the long story short (so as not to bore some of the readers and not to get on the bad side of the moderators for being longwinded), everything got unpacked, batts charged and I'm giddy with enthusiasm to try that 'magic mesh' thingy everybody is talking about.
Just to be 'well educated' I've watched a number of YouTube vids about Doom Mesh-RTA.
Hmmm...First things first..it's a heavy beast. I thought to myself, a nice sturdy RTA made from proper stainless steel (and not the Chinese stainless steel aka silver plated brass), everything fits smoothly together and in case of emergency I could always use it as a deadly weapon, another plus is that by lifting it my lips a couple of hundred times a day I could finally have biceps like Conan the Barbarian.
It was simple to change the hated TPD 2ml tank to a larger 3.5ml tank with the help of screwing in an extender. Now I felt really good. On Geek Vape Boost Plus it looks 'cool', I thought to myself, no more snickering behind my back when I walk down the street. Yeah...I'm the Man!
The next challenge was to fit the mesh, thread in cotton, prime it, put it all together, fill the tank and blisfully start vaping. What could go wrong? This is so easy...I'm the Man!...I can do it!
Fitted the mesh, fired it at low watts to get rid of the oil/dirt and to get a nice even glow. So far so good.
Thread the cotton, OK, on the 'Planet of the Vapes' in one of the threads they did say use as much cotton as you can and then add some more, fine, I'll do just that, got a nice thick bundle of cotton, sqeezed one end and started threading it through...WTF...no matter how much I squeezed, no matter how hard I pushed the bloody thing woudn't go through! This is ridiculous I thought, after all...I'm the Man!...loosing my viriginity was easier then this! It's like trying to thread a needle with a tree branch!
The mesh lost it's shape, the cotton got twisted and oily from my sweating hand/fingers and I'm starting to swear. No good.
Right, let me think, ahhh, they did mention there is a spring loaded 'lever' below the mesh that helps to press cotton against the mesh, Ok, so, just press on it as you thread the cotton through and it's done, easy. Ermmm, no efing way! After 'reshaping' the mesh, I've started again. It's the same story as before. I beginning to think that this thing hates me!
F**k this, I unscrew the mesh, place the thick lace of cotton across as shown in vids and screw the mesh in place. I win!
Primed the cotton with my favourite juice, nice and soggy, just as it should be. Using 510 adaptor I put it on Boost Plus and fire to check on my build.......NO ATTOMISER! error message appears...what? WHAT?! WTF now! At this stage I'm slowly beginning to get annoyed, took a few deep breaths and started to look for a short. Found it. Some of the cotton blocked the proper connection when I was fitting the mesh over it. Corrected this. Fired the button again. YES. It seems to be working. All good.
Fitted the tank on my build, filled the tank with the ejuice, set the Watts to 38, got my lips on the drip tip, fired the button and inhaled deeply....S**t!!! F*&k!!! My lungs are on fire!!! I caugh, I splutter and I swear, my wife later said that 'steam' was coming out of my ears (I still think she exaggerated). I rush to the kitchen for a drink of water to put out that lava in my lungs and wiping out the tears I sit down and I'm ready to chuck the bloody thing through the window...but no, I'm the Man!...I can do it!
Took the whole thing apart, looked at my build, yeah, cotton wasn't really making contact with the mesh. Added more cotton, then some more. Primed it again. Put everything back together, lowered the wattage to 15, filled the tank with just about 1ml of juice (just in case so as not to waste any more of it) and took a tentative inhale. YES, bingo, I got there in the end.
Increased the Wattage to 25, inhaled deeply and got a thick plum of cloud. Nice, now I can walk down the street and pretend to be a steam powered train!, especially as every time I inhale the bloody thing is 'whistling', never mind that I feel like I'm inhaling fresh air...this RTA is REALLY airy!
OK, now that it works, it's time to fill up the tank. It's top fill. Good.
Unscrewed the top and filled it to the brim...like a new born, it pissed itself from the bottom air holes. F********k! another 2ml lost! Living in Yorkshire, I'm tight with my money, don't like to waste even a sigle ml, and this thing is now responsible for the loss of at least 3ml! By now my desk is cluttered with all the wet tissues from wiping and cleaning away all that juice. It looks like an aftermath of a teen after watching his first porn movie.
Not deterred I tried again, closed the air holes, closed the juice flow inlet (yes, this RTA does have that option), wrapped a fresh tissue round the bottom half (just in case of another mess), filled it up again. Slowly opened juice flow control, just, just, so that only a trickle of juice would be wetting the wool, opened only one out of the three (huge) airholes, waited, took a deep breath, wiped away some more 'little mess' that still came out of the air hole, wrote my last will & testament, asked God, wife & kids for forgivness and went for it.
Ahhhh....nice....lovely vape...I did it, I'm the Man!, no stopping me now!
Ten minutes later, wife walks into the room and asks me what did I set on fire as there is so much fog in the room it's hard to even see the opposite wall. Once established that the house is not on fire she mutters 'It's the shed for you and that thing'. Oh well, looks like I'm in the bad books again (I will never understand women, I don't complain when she burns the toast!).
To finish off, and just to summerise....
I really like the build, simplicity and the ease of setting up the mesh in this RTA. It's a solid performer.
But...there are minuses as well. It's airy as hell, with one hole open it whistles, it tends to pee itself no matter what you do when you refill, and finally my biggest dissapointment is the lack of flavour, although to be honest the flavour gets a little better the more you vape, maybe the mesh needs a bit of 'bedding in'...dunno...also, vaping on 0.18Ohm mesh with high Watts is hard on battery life.
Did I enjoy the experience? Yes I did. I'm going to experiment a bit more with this RTA, build some coils and try these as well...