wuz_uk
Achiever
- Joined
- Dec 4, 2013
- Messages
- 2,516
Orochi (clone)
The top cap has an adjustable Floating pin so all your attys will fit and no battery rattle.
Both the top and bottom pins are brass and the engraving on the tube is deep.
The top cap is flat so this mod will not suit attys that get there air from the 510.
The locking ring is the pull and twist type and works well.
now the thing that bugs me with this mod is the join between the tube and the bottom cap
as you can see it looks like its not mating flush.
on closer inspection its just not machined at right angles, so it just appears
not to fit flush, but the threads are good so if you can live with that
little niggle everything else is fine.
https://www.fasttech.com/p/1696300 £11.59 free shipping
The top cap has an adjustable Floating pin so all your attys will fit and no battery rattle.
Both the top and bottom pins are brass and the engraving on the tube is deep.
The top cap is flat so this mod will not suit attys that get there air from the 510.
The locking ring is the pull and twist type and works well.
now the thing that bugs me with this mod is the join between the tube and the bottom cap
as you can see it looks like its not mating flush.
on closer inspection its just not machined at right angles, so it just appears
not to fit flush, but the threads are good so if you can live with that
little niggle everything else is fine.
https://www.fasttech.com/p/1696300 £11.59 free shipping